进口磁力泵(巴赫BACH)国外品牌
进口磁力泵,进口品牌,BACH巴赫
产品概述:
磁力驱动离心泵,通常由电动机,磁力偶合器和耐腐蚀离心泵组成。其主要特点是利用磁力偶合器传递动力,*无泄漏,当电动机带动磁力偶合器的外磁钢旋转时,磁力线穿过问隙和隔离套,作用于内磁钢上,使泵转子与电动 机同步旋转,无机械接触地传递扭矩。在泵轴的动力输入端,由于液体被封闭在静止的隔离套内,没有动密封因而*无泄漏。
安装使用:
磁力驱动泵应水平安装,不宜竖立,塑料泵体不得承受管路重量,对于特殊要求垂直安装的场合,电机务必朝上。
当磁力泵抽吸液面高于泵轴心线时,磁力驱动泵起动前打开吸入管道阀门即可,若抽吸液面低于泵轴心线时,管道需配备底 阀。
磁力驱动泵使用前应进行检查,电机风叶转动要灵活,无卡住无异常声响,各紧固件要紧固。
检查电机旋转方向是否与磁力泵转向标记*
磁力驱动泵电机启动后,缓慢打开排出阀,待泵进入正常工作状态后,再将排出阀调到所需开度。
磁力驱动泵停止工作前,应先关闭排出阀门,然后关闭吸入管阀门。
因磁力泵轴承的冷却和润滑是靠被输送的介质,所以禁止空动转,同时避免在工作中途停电后再启动 时所造成时空载运转。2、被输送介质中,若含有固体颗粒,磁力驱动泵入口要加过滤网:如含有铁磁质微粒,需加磁性过滤器。3、磁力驱动泵在使用中环境温度应小于40℃,电机温升不得超过75℃。4、磁力驱动泵被 输送的介质及其温度应在泵材允许范围内(详见附表)。工程塑料泵的使用温度<60℃,金属泵的使用 温 度<100℃,输送吸入 压力不大于0.2mpa,大工作压力1.6mpa、密度不大于1600kg/m3,粒度不大于30 × 10-6m2/s的不含硬颗粒和纤维的液体。5、磁力驱动泵对于输送液为易沉淀结晶的介质,使用后应及时清洗,排净泵内积液。
工作原理:
本泵采用外混式轴向回水泵体结构,泵体由吸液室、储液室、蜗壳、回流孔、气液分离室等部份组成,结构见图一。泵启 动后,在离心力的作用下,吸水室中的剩余液与进液管路中的空气被叶轮搅拌成气混合物,混合物经蜗壳进入气液分离室,随着速度减慢,导致气水分离,空气由泵 出液口排出,液经回水孔返回泵内, 经过多次循环,进液管道中的空气被排净,使泵内形成一定的真空度,达到自吸的作用。
巴赫简介
巴赫,您可靠的合作伙伴
欢迎您来到巴赫。我们集研发、生产、配套定制及专业服务为一体,为您提供完整、优质的配套,工艺及控制系统的解决方案。
巴赫产品的价值主张是:可靠、便利、新颖。
巴赫*坚持研发能力创新,制造实力打造,质量体系建设,与客户服务改进,围绕提升产品及服务的可靠性开展,这些都是可靠的必要条件。
-- 可靠性首先来自于强大的实力,在产品研发阶段就反复验算,认真求证,提升可靠性。
-- 其次,必须依靠强大的敏捷制造能力,也就是以设备硬件为根基,通过精益管理,综合而成的敏捷制造能力。
-- 第三,质量保障体系的建设,产品落在实处。
后,仅仅有自我的管理是不足的,大量的第三方认证的艰辛过程,让巴赫产品反复经历了痛苦的蜕变,逐步走向成熟、稳靠。
2. 便利:便利是巴赫产品的第二价值主张
客户的便利是巴赫追求的重要目标。提供的便利,包括:
-- 产品覆盖范围宽广,产品线齐全完备,可供选择的产品类型丰富,为客户提供“一站式”解决方案,节约时间和精力。
-- 为客户提供特殊需求定制,专门产品定制,相关产品集成等系列服务,满足客户个性化需求或有效解决具体的施工难题。
-- 选型软件完善,提供技术细节完整详细,配件丰富,非常贴合施工和使用实际,节省大量的沟通澄清时间。
-- 提供敏捷的供货期,充分满足那些直到后一刻才得以决定下来的客户。
3.并非简单追求“与众不同”,而是追求“为客户创造价值的创新”
-- 结构更简单、合理;
-- 安装使用更方便;
-- 维修的负担少,综合拥有成本(TOC)低;
-- 更为敏捷务实的方法快速解决售后服务问题。
Brief Introduction to Bach
Bach, your reliable partner
Welcome to Bach. We integrate R&D, production, matching customization and professional services to provide you with complete and high quality matching, process and control system solutions.
The value proposition of Bach's products is reliable, convenient and novel.
Bach's long-term adherence to R&D capability innovation, manufacturing strength building, quality system building, and customer service improvement, focusing on improving the reliability of products and services, are all reliable and necessary conditions.
Reliability comes first of all from strong strength. In the stage of product research and development, it is checked repeatedly and verified carefully to improve reliability.
Secondly, we must rely on the powerful agile manufacturing capability, which is based on equipment hardware and integrated by lean management.
Third, the construction of quality assurance system and the implementation of products.
Finally, self-management alone is not enough. A large number of third-party certification of the arduous process, so that Bach products have experienced painful transformation repeatedly, and gradually become mature and reliable.
2. Convenience: Convenience is the second value proposition of Bach's products
Customer convenience is an important goal of Bach. The facilities provided include:
The products cover a wide range, complete product line and abundant product types are available, providing customers with "one-stop" solutions, saving time and energy.
- Providing customers with special needs customization, special product customization, related product integration and other series of services to meet customer personalized needs or effectively solve specific construction problems.
- Perfect selection software, complete and detailed technical details, rich accessories, very suitable for construction and practical use, saving a lot of communication and clarification time.
Provide an agile delivery date to fully satisfy customers who have not been able to decide until the last minute.
3. It is not a simple pursuit of "distinctiveness", but the pursuit of "innovation to create value for customers".
- Simpler and more reasonable structure;
- Easier installation and use;
- Low maintenance burden and low TOC;
- A more agile and pragmatic way to quickly solve the problem of after-sales service.
(仅供参考)