当前位置：安徽贝意克设备技术有限公司>>非标定制>> 双独立温场高温滑轨炉（High temperature slide furnace with double independent temperature field）
①It is a high temperature sliding rail furnace with two completely independent temperature fields
是一款两个独立温场的高温滑轨炉
②Adopt the clamp fast sealing flange, easy to install and disassemble the sample
采为卡箍快捷密封法兰，安装拆卸取放样品简便快捷
③Two digital temperature controllers can independently control the temperature, and 30 temperature rise and fall programs can be set
两个数字温度控制器可独立控制温度，并可设置30段升降温程序
④The heating area is heated with silicon carbide rods, and the continuous use temperature can reach 1300 degrees
加热区均采用硅碳棒进行加热，连续使用温度可达1300度
⑤Two independent furnace bodies can be close or separated, which can flexibly control the entire temperature distribution
两个独立的炉体可靠近亦可分离，可以灵巧的控制整个温度分布
| Power 输入电源 | Power rated: 8KW 额定功率：8KW | |||
| voltage 电压 | Voltage rated: AC220V 额定电压： AC220V | |||
| Working Temperature 工作温度 | Max. Temperature: 1400°C 温度：1400℃ Continuous working temperature: ≤1300℃ 持续工作温度：≤1300℃ The recommended heating rate:Below800℃≤10℃/min，800-1000≤5℃/min,Above1000℃≤3℃/min 推荐升温速率：800℃以下≤10℃/min，800-1000≤5℃/min,1000℃以上≤3℃/min | |||
| Temperature Controller 控温方式 | PID automatic control and auto-tune function 模糊PID控制和自整定调节 30 programmable segments for precise thermal processing 智能化30段可编程控制 Built-in protection for the over-heated and broken thermocouple 超温和断偶报警功能 | |||
| Length of heating zone 加热区长度 | 200+200mm | |||
| Heating Elements 加热元件 | Silicon carbon rod 硅碳棒 | |||
| Thermoelectric couple 热电偶 | 2 Type S thermocouple S型热电偶（2支） | |||
| Temperature Accuracy 控温精度 | +/- 1℃ | |||
| Size 尺寸 | Size of equipment：2000*500*830mm 设备尺寸：2000*500*830mm Corundum tube dimensions：OD: 50mm * Length 1800mm 刚玉管尺寸：OD: 50mm * Length 1800mm | |||
| Net Weight 净重 | About200kg 约200kg | |||
| Flange 法兰 | Transverse clamp flange: stainless steel, transverse clamp structure 横向卡箍法兰：不锈钢材质，横向卡箍结构 Left air inlet; KF25 vacuum port on the right 左端进气口；右端KF25抽真空接口 KF16接真空计接口，破空阀门
| |||
| Mode of movement 移动方式 | Move manually. (This equipment can be moved under low temperature or room temperature. In case of high temperature, the limiter on the furnace rail can be locked to prevent the furnace from moving under high temperature and reduce the risk of pipe breakage) 手动移动。（本设备的移动是在低温下或者室温下方可移动，高温时可将炉体轨道上的限位器锁死，防止高温移动炉体，降低断管风险） | |||
| Standard fittings 标准配件 |
1 corundum tube, 2 pairs of alumina Tube wall 刚玉管1支，氧化铝管堵2对 1 set of stainless steel transverse clamp flange 不锈钢横向卡箍法兰1套 2 sets of silicone sealing ring, 1 pair of high temperature gloves 硅胶密封圈2套，高温手套1副 Crucible hook 1, S type thermocouple 2 (installed in the furnace body) 坩埚钩1支，S型热电偶2支（安装在炉体内）
|
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供，信息内容的真实性、准确性和合法性由相关企业负责，仪表网对此不承担任何保证责任。
温馨提示：为规避购买风险，建议您在购买产品前务必确认供应商资质及产品质量。
仪表网