Millennium II 氧气气体探测仪
Millennium II 氧气气体探测仪是专门设计用来报警当氧气含量偏离了环境值20.9％时的分析检测而进行报警的。它提供了一种快速，在检测范围为0至25％的氧气**和可重复的反应。氧传感器是符合Millennium II单声道，双声道，和基本型变送器相兼容。
| |
The Millennium II Oxygen (O2) Deficiency Detector is designed specifically to alarm when oxygen levels deviate from the ambient value of 20.9%. It provides a fast, accurate and repeatable response within a detection range of 0 to 25% oxygen. The O2 sensor is completely compatible with the Millennium II Single Channel, Dual Channel, and BASIC transmitters.
The Millennium II maintains an uninterrupted digital signal between the sensor and the transmitter, from up to 2000ft away! It can communicate seamlessly with external safety equipment, whether through Analog, Relay, Modbus RS485 or HART output configurations. The housing design offers easy access to the controller where the intuitive menu options, time and date stamp event logging, non-intrusive calibration and power switch can all be accessed through the innovative OLED graphic display. This OLED display is completely unique in the market, providing read-outs that are visible in darkness or bright sun, blistering heat or at temperatures as low as -55°C. All this amounts to a detector which stands alone in it's simple installation, calibration, and day-to-day operation.
The Millennium II is available in a stainless steel or aluminium certified housing, drawing minimal power and working across a wide power range, from 10.5 Vdc up to 32 Vdc.
- "SMART" Technology
- Digital Sensor Diagnostics
- Global Certifications - Cl1 Div1
- Easy To Use, Intuitive Menus
- Full Event And Data Logging
- Transmitter is SIL 2 Rated by TÜV SÜD
- +2000ft. Sensor Separation
- Lowest Power Consumption Available on the Market
SPECIFICATIONS SHEET | PRODUCT MANUAL
|
|
|
| - SMART Sensor Technology
The transmitter can easily be fitted with a replacement gas sensor. SMART (Self Monitoring Analysis and Reporting Technology) sensors are pre-calibrated and easily connect to the transmitter which instantly recognizes a newly fitted sensor and automatically uploads it's specific configuration profile.
- Single, Multi-Channel, and BASIC Controllers
No need to purchase additional gas specific detectors. Use with 1 or 2 sensors and mix and match gas types with SMART controllers and sensors.
- Global Certifications
FM Approved Performance, Certified Class 1, Division 1 Explosion proof to CSA, ANSI-UL/ISA, ATEX, INMETRO, and GOST-R Safety and Technical Standards - SIL 2 Rated By TÜV SÜD - ABS Marine Approved.
- Low Power Requirements - Widest Input Power Range
Allows for longer sensor separation (+2000ft.) using lighter gauge cabling which means lower installation costs and increased system stablility where voltage drops occur. Serious conditions can occur during voltage drops when other detectors will simply stop functioning or shut down operations by going into fault mode. The industry's lowest power draw makes is also ideal for solar, TEG, and turbine powered applications.
- Fast Response
Sensor and transmitter continuously communicate digitally, giving you the confidence of stable, accurate protection with leading response times.
- Bright OLED Display
The only detector on the market with a full graphic OLED display that is easy to read in all ambient lighting conditions and operates down to -55°C!
- Analog, Relay, Modbus 485 RTU and HART Communication Protocols
Enhanced communication allows the detector to work seamlessly with external safety equipment.
- Easy To Use Menus
Whether you're disabling a sensor or simply setting display language such as English, French, Portuguese or Spanish, the full text menu instructions make the installation, operation and calibration simple. No manual necessary!
- Event Logging
Calibration intervals, low/high gas alarms and faults are time and date stamped, then stored in non-volatile memory. Log up to 980 sequential events.
| |
