上海美盛自动化设备有限公司
325BT便携式PPM的氧分析仪便携式微量氧分析仪325是专为**测定痕量在清洁,干燥的样气PPM的氧气。客户可更换电化学传感器产生一个小的输出电流直接正比于样品中的氧气量,是衡量任何微量氧范围从0-100 ppm级到0-9999 PPM的能力。可读的*低水平是百万分之一。
325BT便携式PPM的氧分析仪 The Nova 325 Portable Trace Oxygen Analyzer is designed for accurately measuring trace PPM oxygen in clean, dry sample gas. The customer replaceable electrochemical sensor produces a small output current directly proportional to the amount of O2 in the sample and is capable of measuring trace PPM levels of O2 in any range from 0-100 to 0-9999 PPM. The lowest readable level is 1 PPM. Bypass solenoid valves are used to trap low PPM oxygen in the O2 cell to avoid exposure to ambient air. This allows for a rapid purge down and also protects the cell from momentary over exposure to high O2 levels. A flow control valve and flow meter are provided for regulating the flow of samples under positive pressure. A built-in sample pump is provided for use on samples under atmospheric or slight negative pressure. A rechargeable battery provides enough power for the pump and electronics for about 20 hours of continuous opertion. The analyzer may still be operated while it is being charged. A red LED indicates when to recharge the analyzer and a green LED indicates that it is receiving recharging power. The battery recharger is included with the analyzer.
便携式微量氧分析仪325是专为**测定痕量在清洁,干燥的样气PPM的氧气。客户可更换电化学传感器产生一个小的输出电流直接正比于样品中的氧气量,是衡量任何微量氧范围从0-100 ppm级到0-9999 PPM的能力。可读的*低水平是百万分之一。
Specifications · Applications · Features · Options · Calibration · Unique Applications
Specifications
Method of Detection
Low range electrochemical O2 sensor
Ranges Available
0-100 PPM to 0-9999 PPM O2
Resolution
1 PPM
Accuracy & Repeatability
±2% of reading
Drift
±1% of full scale per week
Response Time (T-90)
O2 sensor may require an initial purge down from air to low PPM O2, which may last up to 6 hours. After purge down, T-90 response from 1000 to 100 PPM is 30 seconds.
Ambient Temperature Range
0-50 ºC
32-122 ºF
Linearity
±2% of full scale
Size & Weight
8" W x 9 1/2" H x 10" D @ 12 lbs. (20 x 23 x 25 cm @ 5.5 kg)
Power
AC/DC operation. 115 VAC 60 Hz for recharging (Other voltages available)
Output Options
0-1V or 4-20mA (optional)
Alarms
One high or low O2 alarm (optional)
Hazardous Area Rating Options
General Purpose, Non-Hazardous
Applications
For high accuracy analysis of trace PPM oxygen (O2) in non-corrosive process gas.
Features
Options
Calibration
Unique Applications
The PPM O2 sensor in Model 325 can be affected by the presence of other gases such as H2S.
All Nova analyzers are built using proven technologies and techniques. If this product does not suit your application, please contact Nova. In many cases, we are able to build an analyzer specific to your needs.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
仪表网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份