| Specification | DIW-15 | DIW-20 | DIW-75 | DIW-120 |
Measuring range N丒m
（at the time of Track） | 0.20 - 15 N | 0.20 - 20 N | 0.20 - 75 N丒m | 2.0 - 120 N丒m |
| 2.0乣150 kgf丒cm | 2.0乣200 kgf丒cm | 2.0乣750 kgf丒cm | 20乣1200 kgf丒cm |
| 2.0乣130 lbf丒in | 2.0乣180 lbf丒in | 2.0乣650 lbf丒in | 20乣1040 lbf丒in |
| Accuracy | 亇0.5% （F/S）
（199 or less digit亇1digit） | 亇0.5% （F/S）
（499 or less digit亇3digit） | 亇0.5% （F/S）
（199 or less digit亇1digit乯 |
| Display | The 4 figures digital display of LCD |
| The measurement direction | CW-CCW （rightleft） |
Measuring
mode | P-P Peak | Holding Peak Load Value |
| T-R Track | Showing Real time torque value （ Used for Zero-Adjustment ） |
| P-D Peak down | Holding Load Value at the moment to change from upward to downword |
| C Real-time output | Load torque value is outputted every about1/ 160 second |
Decision
function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing |
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. |
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） |
| Data memory | 800 data / ten channels data |
| A setup of the number of counts | One to 99 count （count in a direction with a bundle） |
| Auto power save | 10 minutes no use, automatically switch off. |
| Charging time | From empty - less than 5hours |
| Continunous working time | 12 hours |
| Outside size | 冇34（grip）亊236（L） | 冇34（grip）亊235（L） | 冇34（grip）亊320（L） | 冇34（grip）亊445（L） |
| Weight （about） | 430g | 470g | 620g | 830g |
| Socket engagement | 6.35 square, including steel ball | 9.5 square, including steel ball | 12.7 square, including steel ball |
| Attachment | - | One-way socket |
Accessories
（one piece each） | AC/DC adaptor |
| An inspection report, a proofreading certificate, a traceability system figure |
