| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 |
Measuring range
| 2.0乣500 mN
0.020乣5 kgf丒cm
0.020乣4.5 lbf丒in | 0.020乣2 N
0.20乣20 kgf丒cm
0.20乣18 lbf丒in | 0.20乣6 N
2.0乣60 kgf丒cm
2.0乣54lbf丒in |
| Accuracy | 亇0.5% （or less 499亇3digit） |
| Display | The 4 figures digital display of LCD |
| The measurement direction | CW-CCW （rightleft） |
Measuring
mode | P-P Peak | Peak load value hold. |
| T-R Track | Indication of real time torque value. |
| P-D Peak down | Holding Load Value at the moment to change from upward to downword
|
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. |
Decision
function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible.
Can confirm the set value by the buzzer sound or LED. |
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. |
| clearance | It is a display clearance in set-up time. （0.5 - 3.0 sec） |
| One-touch zero | A clear button is pushedit is a zero. data output. |
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） |
| Data memory | 800 data stored |
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh |
| Auto power save | 10 minutes no use, automatically switch off. |
| Charging time | about 3hours |
| Continunous working time | 10 hours |
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） |
| Weight | Meter part 520g |
| Bit/Socket part | 兂4 | HEX 6.35 |
| Accessories
（one piece each） | 兂4 bits
（亄）丂侐0/侐1 | 6.35HEX bits
（亄）丂侐1/侐2 |
| Receipt case |
| AC/DC adaptor |
| An inspection report, a proofreading certificate, a traceability system figure |
