德国菲希尔*新铁素体含量检测仪FMP30
The rugged FERITSCOPE® FMP30 with plug-in type smart probe is suited for fast, non-destructive and accurate measurement of ferrite content on-site or in the lab according to the magnetic inductive method.
铁素体含量检测仪FMP30The measurement range is from 0.1 to 80 % Fe or from 0.1 to 110 FN. The measurement options are either measurable in Ferrit-percentage %Fe or in Ferrit numbers FN.
1，铁素体含量检测仪FMP30应用：
Applications
Measurement of the ferrite content in
austenitic steel welds (of tubing etc.)
normal construction steel with austenitic chrome alloy steel welded cladding (e.g., in boilers, vessels, etc.)
duplex steel.
This easy-to-use instrument has an USB interface for a PC and printer connection. It offers memory for up to 20000 measurements with up to 100 applications. Further a detailed statistical and graphical evaluation is possible.
The calibration of the FERITSCOPE® FMP30 is traceable to internationally approved IIW secondary calibration standards. The instrument therefore meets all requirements of ANSI/AWS A4.2 and DIN EN ISO 8249 as well as of the "Basler" standard.
The picture shows one of the 3 sets of available calibration standards with certificate for different Ferrite-Number ranges.
All Fischer calibration standard sets are traceable to internationally approved IIW secondary calibration standards from TWI/England.
2，铁素体含量检测仪FMP30参数如下：
Features
Memory for up to 20,000 readings
Up to 100 calibratable applications
Capability of allocating readings into up to 4,000 Blocks
Date and time stamp for blocks
Statistics display of common characteristic values in the block and final results. Output of characteristic variance-analytical values
Graphical measurement display as a histogram with a Gaussian plot
Capability of entering process tolerance limits and computation of the associated process capability indices cp and cpk
Audible and visual warning when tolerance limits are exceeded
Free-running display with additional presentation of the reading as an analog bar between the tolerance limits
External key-triggered measurement acquisition, e.g., in hollow cylinders with small diameters
Capability to enable matrix measurement mode for connected multi-point measurements
Capability of averaging measurement data: Only the mean value of several readings will be stored
Measurement acquisition through area measurement possible: Only the single readings until probe lift-off are captured and averaged
Capability to measure continuously with the probe placed on the specimen
Outlier rejection for the automatic elimination of erroneous measurements
Correction of any stored reading
Application linking mode: Ability for common normalization/calibration of applications
Designations for applications through the optional PC program MP-Name
USB port to a printer
涂装 相关仪器：涂层测厚仪，漆膜硬度测试仪，电解膜厚仪，黏度计/粘度计，X射线测厚仪，附着力测试仪，微型光泽仪，分光色差仪，雾影仪，反射率测定仪，光谱仪，涂膜干燥时间记录仪，标准光源箱
