德倍加福P+F光电开关 返回列表页

德倍加福P+F光电开关

Miniature design with versatile mounting options
Space-saving distance sensors in small standardized design
Multi Pixel Technology (MPT) - exact and precise signal evaluation
DuraBeam Laser Sensors - durable and employable like an LED
IO-link interface for service and process data
一般特性
测量范围 40 ... 100 mm
光源类型 激光二极管
光源类型 调制红光
Laser nominal ratings 
激光 1
波长 680 nm
光斑直径 approx. 3 mm at a distance of 100 mm
发散角 approx. 2 °
分辨率 0.1 mm
功能安全性参数
平均失效时间（天） 560 a
使用寿命（...月...天） 20 a
诊断范围 0 %

德倍加福P+F光电开关

指示灯/操作键
功能显示 LED yellow:
constantly on - switch output active
constantly off - switch output inactive
控制器 TEACH-IN 按键
电气特性
接口类型 IO-Link ( via C/Q = pin 4 )
IO-Link Revision 1.1
Min. cycle time 3 ms
Process data witdh Process data input 3 Byte
Process data output 2 Bit
Compatible master port type A
输出开关类型 The default setting is:
C/Q - BK: NPN normally open, PNP normally closed, IO-Link
Q2 - WH: NPN normally open, PNP normally closed
信号输出 2推挽（4 in 1）输出，短路保护，反极性保护，过电压保护
使用类别 DC-12 and DC-13

德倍加福P+F光电开关