湖北高天试验设备有限公司

高低温试验箱制冷系统的基本组成

时间:2018-1-24 阅读:2731
分享:

高低温试验箱制冷系统的基本组成

高低温试验箱制冷系统的基本组成

 

 

 

通常制冷系统以压缩机和膨胀阀为界,根据压力的不同,可以分为高压侧和低压侧两部分。

结构简图


制冷系统组成及运行原理动画

 

 

一、高压侧(HIGH SIDE)

 

大致相当于20个大气压的高温高压气体(300 psi of Hot High Pressure Gas)

换算:1个标准大气压=14.7Psi=1.013bar=0.1013MPa 

 

标准大气压(Standard atmospheric pressure)

 

1、压缩机

COMPRESSOR

将低压气体压缩为高压气体。

压缩机

 

2、冷凝器(CONDENSER)

冷凝器是一个用于将制冷刘所含热量释放、并将制冷剂由气态转变成液态的热交换器。将高温高压的气态制冷剂变成高压液态制剂。

一种结构的冷凝器

实物解剖图

 


片式冷凝器结构示意图


实物图

 

3、贮液干燥器(RECEIVER DRIER)

储存、缓冲、干燥和过滤。


贮液干燥器结构图

4、膨胀阀(EXPANSION VALVE)

节流降压、控制过热度、调节流量、防止压缩机液击。

 

 

 

一种热力膨胀阀解剖图

P1+P4 = P2+P3
P1 = Bulb Pressure (Opening Force)
P2 = Evaporator Pressure (Closing Force)
P3 = Superheat Spring Pressure (Closing Force)

P4 = Liquid Pressure (Opening Force)

一种电子膨胀阀解剖图

一种电子膨胀阀外观

The compressor and the electronic expansion valve (EEV) are integrated in a control loop. When the cold air requirement changes, the EEV takes on the task of precision adjustment by varying the degree of opening within a few seconds. If this precision control is no longer sufficient, the cooling capacity is adapted by way of the compressor speed. Due to the short control response times, the system always works in the optimum operating range, making it even more efficient.

 

二、低压侧(LOW SIDE)

17-30PSI of Low Pressure Gas

1个标准大气压=14.7Psi=1.013bar=0.1013MPa

 

5、蒸发器(EVAPORATOR)

吸收空气中的热量(降温),干燥空气(降湿)。

蒸发器


会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

X
该信息已收藏!
标签:
保存成功

(空格分隔,最多3个,单个标签最多10个字符)

常用:

提示

X
您的留言已提交成功!我们将在第一时间回复您~
拨打电话 产品分类
在线留言