标准编号 | 标准中文名称 | 标准英文名称 |
DL/T746-2001 | 电站蝶阀选用导则 | |
GB/T12238-1989 | 通用阀门法兰和对夹连接蝶阀 | General purpose industrial valves—Flanged and wafer butterfly valves |
GB/T3036-1994 | 船用中心型蝶阀 | Marine center-pivoted batterfly valves |
GB/T3037-1994 | 船用双偏心型蝶阀 | Marine duo-eccentric-pivoted butterfly valves |
JB/T4079-1991 | 高真空蝶阀 型式与基本参数 | |
JB/T7550-1994 | 空气分离设备用切换蝶阀 | |
JB/T53145-1994 | 空分设备用切换蝶阀 质量分等 | |
JB/T8527-1997 | 金属密封蝶阀 | |
JB/T5299-1998 | 液控止回蝶阀 | |
JB/T8692-1998 | 烟道蝶阀 | |
JB/T53171-1999 | 蝶阀 产品质量分等 | |
JB/T56170-1999 | 变压器用蝶阀 产品质量分等 | |
JB/T50057-1999 | 空气分离设备用切换蝶阀 产品质量分等 | |
JB/T8863-2004 | 蝶阀 静压寿命试验规程 | |
NF C46-511-2001 | 工业过程控制阀.第3-2部分:尺寸.蝶阀除外的旋转控制阀门的面对面尺寸 | (Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.) |
ANSI/AWWA C 504-1994 | 橡胶垫密封蝶阀 | (Rubber-Seated Butterfly Valves) |
ASTM F 1098-1987 | 管子公称尺寸2-24号用蝶阀外壳尺寸 | (Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24) |
BS EN 593-1998 | 工业阀门.金属蝶阀 | (Industrial valves - Metallic butterfly valves) |
EN 593-1998 | 工业阀门 金属蝶阀 | Industrial valves - Metallic butterfly valves |
EN 60534-3-2-2001 | 工业过程控制阀 第３部分：尺寸 第２节：无法兰控制阀（薄型蝶阀除外）的端面间距尺寸 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001) |
prEN ISO 16136-2001 | 工业用阀门 热塑性材料制蝶阀 | Industrial valves - Butterfly valves of thermoplastic materials (ISO/DIS 16136:2001) |
prEN 593-2003 | 工业阀门 金属蝶阀 | Industrial valves - Metallic butterfly valves / Note: Intended as replacement for EN 593 (1998-01). |
DIN 85003-3-1997 | 造船用管件的交货技术条件.第3部分:蝶阀 | (Technical specifications for valves for shipboard use - Part 3: Butterfly valves) |
DIN 3356-1-1982 | 蝶阀.一般数据 | (Globe valves; General data) |
DIN EN 60534-3-2-2002 | 工业过程控制阀.第3-2部分:尺寸.无法兰控制阀(薄型蝶阀除外)的端面间距尺寸(IEC60534-3-2:2001) | (Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001); German version EN 60534-3-2:2001) |
