产品推荐:水表|流量计|压力变送器|热电偶|液位计|冷热冲击试验箱|水质分析|光谱仪|试验机|试验箱


仪表网>技术中心>使用指南>正文

欢迎联系我

有什么可以帮您? 在线咨询

防爆操作柱是怎么控制

来源:乐清市浙创防爆电气有限公司(防爆照明动力配电箱)   2014年05月12日 16:11  

开关代号简要说明 Brief Instuction for switch code 
   开关组合
   符号
 The code
 of switch 
                        接触图
                  Chart of contact 
             等效开关
            Equivalent
            switch  旋钮位置(实践表示定位
虚线表示自复位)
Rotary button's position
real line denotes location
broket line denotes auto-
resetting         等效功能说明
     Instruction for
     equivalent function 
      A       A.功能接线均与双按钮相同,
自动复位.
Functional wiring is the
button with auto resetting.
 
      B       B.功能与双按钮相同,起动复
位,增加了锁停档位,避免误操作
Functional wiringis the same as
button with auto resetting,add
"lock-stop"to avoid mistake operating. 
     C       C.功能为2个带常开触点的按钮
自动复位,适合于高压电机控制
电路.或采用A功能面板.
Button with 2usually-open contacts
and auto-resetting,Suitable for
high-voltage engine control circuit
or function panel A.  
     D       D.小功率电源开关.
Mini-power switch 
     E       E.功能与三钮相同,控制电机正反
转用,正,反起动位置自复位.
Function is the same as three buttons
buttons to control-conversion of FW&BW
starters can auto-reset. 
     F       F.选择开关,中间带停止档位.
Selected switch with stop location in midst.
 
     G       G.相当于2个按钮和一个切换开关
装于一轴,在起动与停止之前均可
输出联络信号或监控信号
Be equol to mounting two buttons and one
change-over switch in one axe.Can output
contact signal or inspect signal beford
startin and stopping. 
      H       H,多信号逐级传送,方向任意旋转.
Multi-signals transmit gradually
and conbvert in random. 
      I       I.在H基础上增加了总信号传送功能.
Add function of chief-signal transmitting
on the base of H struchurd. 
  




       J                 J.二位进级,逐级切换.
   Change-over gradually.
 
      K            K,切换开关
    Change-over switch. 
      L           L.三极双掷选择开关
    Selected switch with tree poles
    and two launches. 
      M           M,自动,手动,起动三位置转换开关
    起动自复位,起动后必须经过停止档位
    才能转向自动档位.
   Change-over switch with automtion
   hand,starting.Convert to automation
   through stop location. 
     N          N,与M结构略有不同,起动后不经停
   止档位直接转向自动档次.
   Little different from m universal
   structure,it don't pass stop location
   to automation location. 
    O          O.起动为双触点带锁停功能,起动自复位.
   Double contacts for starting with 
   lock-stopping and auto-resetting.. 
    P          P,停止为双触点,可分别代替A和C,起停,自 
   动复位..
   Double contacts for stopping,to        substitude
A and Cfor starting,stopping and abuto-resetting. 
    停止带双触点,带锁停功能,起动自复位.
    Double contacts for stopping,the
    same as Buniversal panelwith
    lock-stopping and auto-resetting. 
     R          R,起,停均带双触点,起停均自动复位,同
   A面板.
  Doulbe for both starting and stopping
  The same as A universal panel with
  auto-resetting when starting and     stopping. 
      S       S.起停前先传送一个联络信号.
Tramsmit a contact isgnal before
starting and stopping. 




    T               T.起,停均带锁停档位功能,避
免误操作,不自动复位.
Equipped with lock-stop
location when starting and stopping.
Can't autoreset to provide mistake operation.
 
    U        U.为双控选择开关
Double-control switch.
 
     V       V.电压换相测量转换开关.
Change-over switch for voltage
usually-opens,the left is as same
as the right
 
    W       W.左右一样的一个正常开自复位按钮.
One auto-reset button with
two usually-opens,the left is
as same as the right.
 
    X       X.为带2个2常开触点的自复位按钮
Two auto-reset buttons with two
usually-opens.
 
    Y       Y.为带4个常开触点的自复位按钮.
Auto-rest button with four usually-opens..
 
     Z       Z.电源程序开关,中间断开,左右均接近
可作消防开关.
Power-source programmed switch can
cut off in between and cut in both
the left and right which an be used
as extinctive switch.
 
    a-1        a-1.用于起动,点动混合电路.
For starting and inching the mixed
circuit.
 
   b-1       b-1.双联动开关.
Double starting switch.
 
    c-1       C-1. 急停按钮开关.
Emergency stopping switch.
 




 外形安装及举例 Outline example     
    
                              BZC51-D2K1(II型)
                二灯一开关挂式 Two lamps one switch,pendant 
    
                  BZC51-B1K1 G(III型)
           一表一开关挂式 One meter one switch,pendant                       BZC51-K2 G(III型)
                         二开关挂式 Two switches pendant 
    
          BZC51-B1D2K1  G(IV型)
       一表二灯一开关挂式 One meter,two lamps one switch,pendant       BZC51-A2D2k1  G(IV型)
 二钮二灯一开关挂式 Two buttons,mtwo lamps one switch,pendant  




    
            BZC51-A2K1  G(II型)
       二钮一开关挂式 Two buttons one switch.Pendant         BZC51-A2D2  G(II型)
        二钮二灯挂式 Two buttons two lamps,pendant 
    
          BZC51-A2B1  G(III型)
       二钮一表挂式 Two buttons one meter,pendant              BZC51-A2  G(I型)
                    二钮挂式 Two buttons,pendant 
     
        BZC51-A2B1D2  G(IV型)
       二钮一表二灯挂式 Two buttons one lamp,pendant                 BZC51-k1  G(I型)
 

免责声明

  • 凡本网注明“来源:仪表网”的所有作品,均为浙江兴旺宝明通网络有限公司-仪表网合法拥有版权或有权使用的作品,未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:仪表网”。违反上述声明者,本网将追究其相关法律责任。
  • 本网转载并注明自其它来源(非仪表网)的作品,目的在于传递更多信息,并不代表本网赞同其观点或和对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。
  • 如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。
联系我们

客服热线: 15267989561

加盟热线: 15267989561

媒体合作: 0571-87759945

投诉热线: 0571-87759942

关注我们
  • 下载仪表站APP

  • Ybzhan手机版

  • Ybzhan公众号

  • Ybzhan小程序

企业未开通此功能
详询客服 : 0571-87759942