0XTE Buffer操作步骤产品应用:
对于一些相对特殊的产品,我们会提供产品说明书,里面会对产品溶解性,及我们所能了解的产品应用信息,实验方案进行描述,您可以作为参考。对于常见试剂,因为应用广泛,一般不提供说明书。如果您在实验过程中遇到了问题,欢迎与我们讨论,我们将尽力帮您解决。
产品名称:0XTE Buffer操作步骤
英文名字:0XTE Buffer
产品描述
Tris-EDTA缓冲液简称TE, 即Tris-EDTA buffer(10mM Tris,1mM EDTA pH8.0),用于溶解DNA、保存DNA等,是常用分子生物学试剂。
产品优势
EDTA可以螯合金属离子,有效保护DNA。
本产品经灭菌处理,为无菌包装。
保存条件
常温保存。
注意事项
本产品为10×浓度,请使用前用水稀释到1×后使用。
如果每次的使用量很小,可以适当分装后再使用。
为了您的安全和健康,请穿实验服并戴一次性手套操作。
0XTE Buffer操作步骤分装及溶液配制:
您收到货物后不要自己进行分包,因为分包环境、包装材料等因素可能导致分包后的产品变质;如您有特殊包装要求,请在订购时候与我们客服代表阐明,当然价格会做适当调整。对于开盖后,长期未使用的,请务必重新密封好,建议Parafilm封口膜,并按照相应储存条件使用。如果放置时间过长,超过产品有效期,建议您重新购买,以免影响实验质量。
0XTE Buffer操作步骤储存条件:
大部分的试剂产品是比较稳定的,只要您严格按照产品包装或者说明书上的储存条件进行储存,*可以保证其在有效期内的正常使用。一般常见储存条件有零下XX摄氏度,2-8摄氏度,常温等。特别提醒,对于某些酶类制品,如果储存条件是2-8摄氏度,不要储存在零下,否则容易失活,对于某些需要严格避光,防潮,充氮气保护的,接触空气或者过分暴露非常容易氧化或者受潮变质。
低温储存产品,运输途中冷藏问题:
对于需要低温储存的产品,我们在运输时候都会采用冷藏包装,但是部分由于外界气温过高,运输时间较长,对于普通冷藏包装,途中可能会温度升高,这些都是没有问题的,因为这种普通冷藏只适用于那些短期内(2周)高温依然稳定的产品,建议低温的储存条件,只是长期储存时候的条件,您可以放心使用。对于某些特殊的产品,如抗体,我们会采用干冰冷藏包装,确保全程低温。公司都对产品性状进行了严格的加速稳定测试,行业经验丰富。
0XTE Buffer操作步骤储存条件:避光、干燥阴凉处封闭贮存,严禁与有毒、有害物品混放、混运。本品为非危险 产品可按一般化学品运输,轻搬动轻放,防止日晒、雨淋!受热、受潮、受光后易丧失活力,保存期短,因此贮存和运输条件比较苛刻。
100张-包 包 称量纸 75mm×75mm
100张-包 包 称量纸 100mm×100mm
100张-包 包 称量纸 150mm×150mm
500个 包 1.8ml冻存管
200个 包 5ml冻存管
81孔 个 2ml冻存盒
100孔 个 2ml冻存盒
36孔 个 5ml冻存盒
单 个 单道定时器
32-32-12-4 个 多用离心管架0.2ml-1.5ml-15ml-50ml
200只 包 5ml大龙吸头
3ml 个 3ml亲和层析柱 (1.1×5.6)
6ml 个 6ml亲和层析柱 (1.2×6)
10ml 个 10ml亲和层析柱 (1.5×8)
30ml 个 30ml亲和层析柱 (2.3×10)
50ml 个 50ml亲和层析柱 (2.5×16)
12-12-36孔 盒 多用冰盒0.2ml-0.5ml-1.5ml
antibody is stable at room temperature for at least one month and for greater than a year when kept at -20°C. When reconstituted in sterile pH 7.4 0.01M PBS or diluent of antibody the antibody is stable for at least two weeks at 2-4 °C.
Important Note This product as supplied is intended for research use only, not for use in human, therapeutic or diagnostic applications.
产品介绍 Paxillin is a 64 kDa cytoskeletal adapter protein involved in organisation and function of focal adhesions, which are critical to cell adhesion and migration. This in turn plays a role in a wide variety of processes including embryogenesis, organogenesis, wound repair, inflammation and cancer. Paxillin contains LD motifs, LIM domains, SH3 and SH2 binding domains that serve as docking sites for cytoskeletal proteins, tyrosine kinases (e.g., FAK, Pyk 2, Src), serine/threonine kinases, GTPase activating proteins and other adaptor proteins (e.g., Actin, Vinculin, Crk).
Function : Cytoskeletal protein involved in actin-membrane attachment at sites of cell adhesion to the extracellular matrix (focal adhesion).
Subunit : Binds in vitro to vinculin as well as to the SH3 domain of SRC and, when tyrosine phosphorylated, to the SH2 domain of V-CRK. Isoform beta binds to PTK2/FAK1 but weakly to vinculin. Isoform gamma binds to vinculin but only weakly to PTK2/FAK1. Interacts with GIT1, NUDT16L1/SDOS, PARVA and TGFB1I1. Component of cytoplasmic complexes, which also contain GIT1, ARHGEF6 and PAK1. Interacts with PTK2/FAK1 and PTK2B/PYK2. Binds ASAP2. Interacts with unphosphorylated ITGA4. Interacts with RNF5 and PDCD10. Interacts with NEK3 and this interaction is prolactin-dependent. Interacts with PTK6.
0XTE Buffer操作步骤Subcellular Location : Cytoplasm, cytoskeleton. Cell junction, focal adhesion. Cytoplasm, cell cortex. Note=Colocalizes with integrins at the cell periphery.
Post-translational modifications : Phosphorylated by MAPK1/ERK2 (By similarity). Phosphorylated on tyrosine residues during