德国奥莱斯OLES进口气动多级式降压调节阀
【进口气动多级式降压调节阀】详细说明:
采用迷宫式阀笼接合压力平衡式阀心的设计,由多个同轴表面分布着迷宫曲径的圆柱盘(层)叠合组成,根据介质工艺参数的不同,设计多个不同迷宫曲径规格与叠合层数组合成阀笼,阀笼将总的流路分成许多细小与迂回甚至台阶状分布的节流通路,迫使流体不断地改变流向与流通面积等逐步降低流体压力,以达到预防闪蒸,空化现象的发生,延长阀内件的使用寿命。此种内件结构适合于各种易产生阻塞流造成蚀的工艺流体的工况。
采用平衡式内件可选取:
1. 笼式单座式(泄漏级别高 使用温度范围小)
2. 笼式双座式(泄漏级别低 使用温度范围大)
The design of labyrinth cage joint pressure balanced valve core consists of several cylindrical discs (layers) with labyrinth curvature on the coaxial surface. According to the different process parameters of the medium, a number of different labyrinth curvature specifications and the number of overlapping layers are designed to form a valve cage. The valve cage divides the total flow path into many small and circuitous flow paths or even platforms. The throttling path with step distribution forces the fluid to change its flow direction and flow area and gradually reduce the fluid pressure so as to prevent flash and cavitation and prolong the service life of the valve internals. The inner structure is suitable for the working conditions of various process fluids which are prone to corrosion caused by blocking flow.
Balanced internals are optional:
1. Cage type single seat type (high leakage level, small temperature range)
2. Cage type two-seat type (low leakage level, wide temperature range)
控制阀参数说明
阀内件特点:套筒导向型 迷宫垫片式阀笼
平衡式内件(可选择不平衡式内件)
普通双座式或带平衡密封环单座结构
阀体类型:直通式 角式 Z形
上阀盖型式:常温标准型 高温散热型 低温伸长型
温度范围: -196℃ ~570℃
阀杆密封型式:普通式标准填料密封
高温型填料密封 波纹管密封
标准泄漏等级:CLASS IV(金属阀座,不带平衡密封
环)
CLASS V(金属阀座,带平衡密封环)
流量特性:等百分比 直线
与管道连接方式:法兰式 对焊式
可调比: 50:1
【进口气动多级式降压调节阀】特点:
1、迷宫式流道对流体介质的清洁度要求较高,否则迷宫流道容易发生堵塞。 2、通过使用不同形式的迷宫盘片进行组合,迷宫式调节阀可以达到不同的流量特性调节曲线。 3、迷宫式盘片制造精度要求很高,一般由司太立合金堆焊,有较长的使用寿命;安装与维护比较简便,盘片易更换。 4、迷宫流道的拐弯级数就是迷宫式调节阀的降压级数,一般可达十几到二十几级,所以迷宫式多级降压结构是常见多级降压调节阀中降压能力的,国外有产品zui高可以达40MPa。 5、出色的抗汽蚀冲刷及消声减振性能,多级拐弯迷宫式流道可以有效地控制流体流速,避免空化、噪声及振动等不良现象的发生。