哪款激光焊锡烟雾净化器可以推荐
电路板焊锡烟雾除烟器
电路板焊锡烟雾过滤设备
电路板焊锡净化设备
线路板焊锡排烟机
线路板焊锡烟雾除烟机
哪款激光焊锡烟雾净化器可以推荐
哪款激光焊锡烟雾净化器可以推荐
| 车间烟雾过滤器 |
| 车间烙铁焊锡抽烟器 |
| 无尘车间焊锡除烟机生产厂家 |
| 工厂焊接烟雾净化器 |
| 电子焊接排烟器* |
| 小型焊接排烟装置 |
| 多焊接工位烟气处理设备 |
| 工业烟雾净化处理器 |
| 深圳车间烙铁焊锡抽烟器厂家 |
| 车间焊锡烟雾净化器 |
| 烙铁焊锡烟雾处理器厂家 |
| 工业车间焊锡除烟机厂家 |
| 工业焊接烟尘净化机厂家 |
针对烙铁焊锡、锡炉浸锡、激光打标、激光医疗、艾灸美容、化学实验等场合所产生的烟雾、少量粉尘、异味、有毒有害气体具有良好的净化过滤效果。产品适用于点对点吸取污染物。
在这些场合中工作，会有着大量对人体有害的烟尘、气体和颗料物。常见的比如，锡焊工作中使用的材料不同、添加物不同、焊接温度不同会产生不同适度的有毒物和致癌物。该系列净化设备是保护操作者健康之选择。
产品采用了多层过滤装置，包括初效过滤绵、中效、高效过滤芯（由HEPA高效过滤部分和气体过滤部分组成），可根据污染物产生量对风量作无级精准调节。有效地过滤拦截0.5μm上污染颗粒、吸附毒害气体，过滤净化率能达到99.99%，净化处理后的洁净空气可直接在室内排放。
风机
◆采用日本直流无刷电机，内置控制器形式，性能、质量更有保障。
◆运行稳定，低噪音，高效率，低能耗，工作时间长。无需定期保养，成本更低。
◆风轮采用涡流式后向设计，特殊合金材质，有效防止风轮被腐蚀。*的动平衡校正技术，让风轮运行更平稳可靠。高风量，大吸力，过滤速率更高。
3.过滤系统
◆采用四重过滤设计。 逐层过滤，确保有害烟尘被滤除得更*。净化率可达99.99%。
◆模块化设计，层层保护。初、中、高效可单独更换，滤芯使用寿命更长，更换成本更低。
◆内部*的密封结构，加上特殊的密封材料，使有害物质得以全部通过过滤系统，滤除效率更高。
◆内置式循环主动过滤方式,避免将室内冷气/暖气排出室外，不破坏操作区间的温度和湿度环境。
Use attention
1. the distance between the smoking hood and the smoke producing point directly affects the effect of smoking. Many tests show that it is appropriate to keep distance in 10-15cm.
2. the flow rate of the air around the smoking hood is fast, which leads to the worse effect of smoking. The fan gear needs to be reduced or closed.
3. the longer the length of the smoking pipe, the weaker the smoking effect.
The more corners of the smoking pipe, the worse the smoking effect.
Suggestion: as far as possible to reduce the pipe bending, if the bend can not be avoided, and as much as possible to increase the amplitude of the bending.
4. air volume regulation
According to the size of the smoke, adjust the knob to ensure that the smoke and dust can be fully inhaled as appropriate, and not necessarily to the maximum air volume. Otherwise, it not only increases the noise, but also reduces the filtering effect.
Filter core replacement
The product relies on all kinds of filter core components to filter the smoke, odor and toxic substances. Therefore, the filter core component to eliminate the consumables, with the amount of saturation, should be replaced regularly.
The replacement cycle suggested: primary filtering cotton and return and return to 10-15 days
