产品概述
一般压力表适用于测量无爆炸危险、不结晶、不凝固及对铜及铜合金不起腐蚀作用的液体、蒸汽和气体等介质的压力。
该仪表采用威卡旋入式外壳，标准铜棒制作的接头，加宽尺寸的弹簧管和全铜反装机芯，并加大了连杆等各连接件的强度，所有紧固件均采用不锈钢螺丝。校准和检验过程采用先进的设备和工艺以保证产品的精度，所以该仪表外观精美，示值精度高，轻敲位移小，重复性能好，使用寿命长。
主要技术指标
测量范围：0.6～2.5MPa
精确度等级：1.0级
使用环境条件：-40～70℃，相对湿度不大于85%。
温度影响：使用温度偏离20±5℃时，不大于0.4%/10℃。
重量：0.44kg
安装螺纹：M20×1.5（特殊要求可订制）
外形尺寸：
（见附图）
Y series nomal pressure gauge
Brief Introduction
The nomal pressure gauge is well suited fore measuring those gases or liquids
Which will neither expiode,nor crysallize,nor corrode or copper alloys.
The meter adopts Wika screw-in type case, standard copper bar connector, bigger size bourdon tube and anti-installed copper machine core, meanwhile we increased the intensity of connection and all the fastener are stainless steel screws.To ensure the meter’s precision ,our calibration and checking procedures are adopting the International advanced equipment and technology.The meter has attractive appearance , high precision, small friction error, good reproducibility and long working life.
Main Technology Data
Measuring range:0.6～2.5MPa
Accuracy:1.0
Environment condition:-40～70℃,relative humidity is no more than 85%.
Temperature influence:when the environment temperature deviate from 20±5℃,the additional error no more than 0.4%10℃.
Weight:0.44kg.
Coneect type:M20×1.5 or special type.
Overall Dimensions
