本站客户服务
仪表网官微
仪表APP
仪表手机版
仪表小程序
恒温溢流水箱检测仪器，适用于测定沥青混合料的密度. *符合（JTG E20-2011）标准。使用前务必仔细阅读说明书。并由 实验人员操作，以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。
The thermostatic overflow water tank is a testing instrument suitable for determining the density of asphalt mixtures. It fully complies with the Ministry of Communications (JTG E20-2011) standards. Be sure to read the instructions carefully before use. It is operated by experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.
恒温溢流水箱设有循环装置,采用高智能控温仪.具有控温精度高,整机设计 防划痕,外观大方,由上海荣计达仪器科技有限公司提供，设备质保期一年，一年内产品如有质量问题，供方负责免费维修。如果因操作不当或者人为损坏，我公司亦应提供维修、更换服务，由此产生的费用我公司会酌情收取。
The thermostatic overflow water tank is equipped with a circulation device and adopts a highly intelligent temperature controller. It has high temperature control accuracy, complete machine design anti-scratch, and elegant appearance. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged at our discretion.
恒温溢流水箱技术参数.
★电源:220V±10％ 50HZ
★加热功率1000W
★制冷功率：550W
★控温精度,±0.1℃
★控温范围：10---60℃
★容积30升
Technical parameters of constant temperature overflow water tank.
★ Power: 220V ± 10% 50HZ
★ Heating power 1000W
★ Cooling power: 550W
★ Temperature control accuracy, ± 0.1 ℃
★ Temperature control range: 10 --- 60 ℃
★ Volume 30 liters
恒温溢流水箱使用方法:
★使用是液体介质液面不得低于台面3cm.
★选用电源功率要大于或等于仪器的总功率,另电源必须有良好的接地装置.
★仪器应放置于通风干燥处,周围应与其他物体有300mm以上距离.
★使用完毕,关闭电源.按下电源插头.
How to use the thermostatic overflow water tank:
★ The liquid level of the liquid medium should not be lower than 3cm.
The power of the selected power supply must be greater than or equal to the total power of the instrument, and the power supply must have a good grounding device.
The instrument should be placed in a ventilated and dry place, and the surrounding should be more than 300mm away from other objects.
★ After use, turn off the power. Press the power plug.
恒温溢流水箱仪表操作:
★当所需温度高于环境温度操作如下:
A.开启电源开关
B.开启循环开关
C.按住.SET键0.5秒,仪表进入主控设定状态,设置所需温度,设定完毕再按SET键0.5秒返回仪表正常控制状态
D,长期不使用仪器必须放掉仪器内的液体.
Constant temperature overflow water tank instrument operation:
When the required temperature is higher than the ambient temperature, the operation is as follows:
A. Turn on the power switch
B. Turn on the cycle switch
C. Press and hold the .SET key for 0.5 seconds, the meter enters the master control setting state, set the required temperature, and then press the SET key for 0.5 seconds to return to the meter's normal control state.
D. If the instrument is not used for a long time, the liquid in the instrument must be discharged.
恒温溢流水箱注意事项
★设备安装时,请检查连接是否正确.
★为了确保安全,请接好地线
★如果设备工作不正常,请和厂家或中间商联系,不要私自拆卸.
★冬季一定要把循环水泵内的水放净防止动裂
Note for constant temperature overflow water tank
When the device is installed, please check whether the connection is correct.
★ To ensure safety, please connect the ground wire
If the equipment does not work properly, please contact the manufacturer or middleman, and do not disassemble it by yourself.
★ In winter, the water in the circulating pump must be drained to prevent it from cracking.
