一、概述:是我公司新产品,配置彩色液晶触摸屏, 的人工智能模糊化控制,采用进口红外探测原理传感器,温湿度和 浓度数据更加稳定准确、使用寿命长,砌墙砖碳化试验箱用于进行混凝土空心砌块、砌墙砖碳化试验的设备。数据自动记录存储,可导出,断电记忆。进口压缩机 节能。
I. Overview of TH-W wall brick carbonization test box: It is our new product, equipped with color LCD touch screen, artificial fuzzy control, imported infrared detection principle sensor, temperature and humidity and carbon dioxide concentration data are more Stable and accurate, long service life, the wall brick carbonization test box is used to carry out the concrete hollow block and wall brick carbonization test equipment. The data is automatically recorded and stored, which can be exported and stored in power failure. Imported compressors are energy efficient
二、符合标准:
产品符合混凝土小型空心砌块检验方法 GB/T 4111-1997和GB/T2542-92 《砌墙砖试验方法》与DL/T5150-2001《水工混凝土试验规程》中碳化试验设备的要求。
Second, the TH-W wall brick carbonization test box meets the standards:
The product meets the requirements of the carbonation test equipment in the test methods for small concrete hollow blocks GB / T 4111-1997 and GB / T2542-92 "Test methods for masonry bricks" and DL / T5150-2001 "Testing rules for hydraulic concrete".
三、技术参数:
★控制温度:15-30℃ 精度:0.5℃
★均匀性:≤1℃ 控制湿度:50-90% 精度:3% 均匀性:≤2%
★内净尺寸: 900×600×650毫米
★外形尺寸: 1650×850×1100毫米
Third, the technical parameters of TH-W wall brick carbonization test box
★ Control temperature: 15-30 ℃ Accuracy: 0.5 ℃
★ Uniformity: ≤1 ℃ Control humidity: 50-90% Accuracy: 3% Uniformity: ≤2%
Inner net size: 900 × 600 × 650 mm
★ Dimensions: 1650 × 850 × 1100 mm
四、操作规程:
★ 先将CO2钢瓶与箱体用高压氧气管连接;
★打开箱体的侧盖,把加湿器的水箱取下,把水注满调节喷雾量大小(顺时针为大、,逆时针为小);
★ 将经过处理的试件放入碳化箱内的铁架上,各试件经受碳化的表面的间距至少不小于50mm;
Four, TH-W wall brick carbonization test box operation rules:
★ First connect the CO2 steel cylinder to the box with a high-pressure oxygen pipe;
★ Open the side cover of the box, remove the water tank of the humidifier, and fill the water to adjust the spray volume (large clockwise, small counterclockwise);
★ Put the treated test pieces on the iron frame in the carbonization box, and the distance between the surface of each test piece subjected to carbonization is not less than 50mm;