铁素体含量检测仪FMP30 建筑检测仪

德国菲希尔*新铁素体含量检测仪FMP30

The rugged FERITSCOPE® FMP30 with plug-in type smart probe is suited for fast, non-destructive and accurate measurement of ferrite content on-site or in the lab according to the magnetic inductive method.

铁素体含量检测仪FMP30The measurement range is from 0.1 to 80 % Fe or from 0.1 to 110 FN. The measurement options are either measurable in Ferrit-percentage %Fe or in Ferrit numbers FN.

1，铁素体含量检测仪FMP30应用：

Applications

Measurement of the ferrite content in

austenitic steel welds (of tubing etc.)

normal construction steel with austenitic chrome alloy steel welded cladding (e.g., in boilers, vessels, etc.)

duplex steel.

This easy-to-use instrument has an USB interface for a PC and printer connection. It offers memory for up to 20000 measurements with up to 100 applications. Further a detailed statistical and graphical evaluation is possible.

The calibration of the FERITSCOPE® FMP30 is traceable to internationally approved IIW secondary calibration standards. The instrument therefore meets all requirements of ANSI/AWS A4.2 and DIN EN ISO 8249 as well as of the "Basler" standard.

The picture shows one of the 3 sets of available calibration standards with certificate for different Ferrite-Number ranges.

All Fischer calibration standard sets are traceable to internationally approved IIW secondary calibration standards from TWI/England.

2，铁素体含量检测仪FMP30参数如下：

Features

  Memory for up to 20,000 readings

  Up to 100 calibratable applications

  Capability of allocating readings into up to 4,000 Blocks

  Date and time stamp for blocks

  Statistics display of common characteristic values in the block and final results. Output of characteristic variance-analytical values

  Graphical measurement display as a histogram with a Gaussian plot

  Capability of entering process tolerance limits and computation of the associated process capability indices cp and cpk

  Audible and visual warning when tolerance limits are exceeded

  Free-running display with additional presentation of the reading as an analog bar between the tolerance limits

  External key-triggered measurement acquisition, e.g., in hollow cylinders with small diameters

  Capability to enable matrix measurement mode for connected multi-point measurements

  Capability of averaging measurement data: Only the mean value of several readings will be stored

  Measurement acquisition through area measurement possible: Only the single readings until probe lift-off are captured and averaged

  Capability to measure continuously with the probe placed on the specimen

  Outlier rejection for the automatic elimination of erroneous measurements

  Correction of any stored reading

  Application linking mode: Ability for common normalization/calibration of applications

  Designations for applications through the optional PC program MP-Name

  USB port to a printer