514.5nm脉冲单纵模激光器采用激光二极管光源制造的514.5nm单纵模脉冲激光器,是514.5nm氩离子激光器的理想替代品，广泛用于分拣,照明,泵浦探针光谱等应用。
514.5nm脉冲单纵模激光器具有优异的脉冲-脉冲功率稳定性,非常适合科学研究。514.5nm脉冲单纵模激光器结构紧凑,具有同步控制接口,适合独立使用也适合作为OEM激光使用.
514.5nm脉冲单纵模激光器应用
Ti:Sapphire激光泵浦
超连续激光产生
深紫外激光
拉曼飘移激发
514.5nm脉冲单纵模激光器规格参数
514.5nm脉冲单纵模激光器具有优异的脉冲-脉冲功率稳定性,非常适合科学研究。514.5nm脉冲单纵模激光器结构紧凑,具有同步控制接口,适合独立使用也适合作为OEM激光使用.
514.5nm脉冲单纵模激光器应用
Ti:Sapphire激光泵浦
超连续激光产生
深紫外激光
拉曼飘移激发
514.5nm脉冲单纵模激光器规格参数
| Parameter | Minimum Value | Typical Value | Maximum Value |
|---|---|---|---|
| Central Wavelength, nm | 514.3 | 514.5 | 514.7 |
| Longitudinal modes | - | single | - |
| Spectral line width FWHM, pm | 0.5 | 0.8 1 | 1 |
| Output power, mW | - | As per request | 150 |
| Pulse duration, ns | 1.5 | 3 | 10 |
| Repetition rate, kHz (depending on pulse energy) | - | As per request | 35 |
| Pulse energy, µJ | 3 | As per request | 25 |
| Power stability, % (RMS, 8 hrs) | - | 0.5 2 | 1 |
| Pulse-to-pulse stability, % | - | 2 | 5 |
| Transversal modes | - | TEM00 | - |
| Beam Diameter at Aperture (1/e2), mm | - | 1 | - |
| Beam divergence (full angle), mrad | - | 1 | 1.1 |
| M2 effective | - | 1.1 3 | 1.4 |
| Polarization direction | - | Horizontal 4 | - |
| Polarization contrast | - | better than 500:1 | - |
| Control interface type | - | UART/USB | - |
| Operation mode | - | APC (CW) | - |
| Input voltage, VDC | - | 5 | - |
| External power supply requirement | - | +5 V DC, 5A | - |
| Dimensions (L-W-H), mm | - | 50 x 30 x 16 5 | - |
| Beam height from the base, mm | - | 10.4 | - |
| Heat-sinking requirement, °C/W | - | <0.5 | - |
| Optimum heatsink temperature, °C | - | 20 | - |
| Warm up time, mins (cold start) | - | 10 | - |
| Temperature stabilization | - | Yes | - |
| Overheat protection | - | Yes | - |
| Storage temperature, °C (non-condensing) | - | - | - |
| Net weight, kg | - | 0.29 | - |
| Max. power consumption, W | - | 14 (10000) | - |
| Warranty, months (op. hrs) | - | 14 (10000) 6 | - |
| Residual IR wavelength contrast, dB | - | 10 | - |
| Laser Safety Class | - | 3B | - |
| RoHS | - | Yes | - |
| CE compliance | - | - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC | - |
| Laser Safety Class | - | 3B | - |
| OEM lasers are not compliant with | - | IEC60825-1:2014 (compliant using additional accessories) | - |
