日本OPTEX PT-U80手持型*
红外测温仪PT-U80测温范围:- 30 ~ 600 ℃
数据记忆功能,USB联机
上下限警告设定
同轴雷射照准 ,显示ZUIGAO / ZUI低值
日本OPTEX PT-U80手持型*
PT-S80/ PT-U80 规格 | |
EL冷光机 能 | 大型3段表示 LED |
同轴雷射光 | MAX /MIN 表示机能 |
上 /下限 警告机能 | 收纳皮套 |
警告机能 | 时间警告机能 |
PT-S80规格 | |
连续测定机能 | 1点储存机能 |
PT-U80 规格 | |
连续设定机能 | 放射率补正(0.3 - 1.2) |
PC连接 | 35点储存 |
日本OPTEX PT-S80*的技术参数:
距离系数: D∶S=33∶1
光学系: SILICON镜头
检出素子: THERMOPILE
检测红外波长: 8~14um
响应时间: 0.5sec/90%
PT-S80红外测温仪
测量精度: -30-0 ±3℃ 0.1-200 ±2℃ 201-600 ±1%
再现性: 读取值±1℃
分辨率: -30.0-199.9 :0.1℃ 200-600:1℃
放射率: 0.95、0.85、0.70切换
上下线温度警告: 警告LED,蜂鸣器,ON/OFF切换
表示机能:NOR/MAX/MIN
电源: 5号(AA)电池2节
电池寿命: 约15小时
使用环境温度: 0~50℃
PT-S80测温仪
使用环境湿度: 35~85%RH
保存温度范围: -10~60℃
重量: 250g
外形尺寸: H×W×D=182×56×38mm
For a clear view of your measurement values, we equipped the display with an EL back light. In addition, we incorporated the large LCD with 3 display levels allowing more information to be shown more clearly and with larger sized characters.
As the EL back light is sensor activated, it lights only when ambient light conditions are low.
Users will be satisfied under many different lighting conditions at the ease of reading the PT-80 display.
Collecting and storing measurement data for reports can be tedious..
For efficient use of measured data, we equipped the PT-U80 with the ability to Send/Receive data when connected to a PC via USB. Using imported data for creating reports is easy. With the Preset Report Form it becomes even easier. Each data setting is also possible on the PC side.
The software is downloadable from our website.
If the laser pointer is shifted off-axis from an actual measurement center, it is difficult to accurately locate it again in the same place. To solve this difficulty, the PT-80 is equipped with a co-axial laser marker which points at the exact center of the measurement area, independent of working distance.
Often, measurement from a long distance can be difficult and sometimes impossible due to a wide measurement area.
The PT-80’s measurement area is 30 x 30 mm from a distance of 1 m. Even from 5 m, its long-focus design still manages an area of only 150 x 150 mm. So safe and secure measurement is possible even in difficult to reach or dangerous locations.
Checking for hot spots in an electrical panel. | Checking for abnormal heating in a bearing. |