安达仪器PCB线路板全自动取样机AD668
Model No.型号：AD668
Automatic specimen cutting machine for micro section
印制线路板金相切片取样机（全自动）
Application:PCB factory physical laboratory Metallurgical sample cutting (bare board)
适用范围：PCB 厂金相实验室取样用。（适用于覆铜板即没有装配元件的 PCB 板）
Technical parameters技术参数：
1.Max sample cutting size取样尺寸: L*W*H=50*50*8mm
2.Min Sample cutting size小取样尺寸: 5*5*8mm
3.Sample size:can be set according to customer requirement (normal size is 20*15mm)
样品尺寸: 可根据客户要求设定（一般为20*15mm）
4.Max board size: 16”*24” (can take sample at any place of the board)
台面尺寸16*24"（能取到PCB 板的任何位置）喉深：28cm
5.Machine spindle spec: 25000r/min/220V/50Hz
取样机主轴：25000r/min/220V/50Hz
6.Machine router spec:1/8” (can change router size according your requirement, but we recommend size is 2.0mm )
取样机锣刀：1/8”（自由更换锣刀，推荐2.0mm）
7.Router stepping in a method: when the setting is finished, the router gets inside automatically, and when therouting finished, the router automatically go out.
进刀方式：设定好取样尺寸后自动进刀，直至切片被*取出
8. Machine is equipped withvacuum cleaner.
取样机配备吸尘器
9.Machine dimension： 680*530*1200mm
取样机外形：长×宽×高=680×530×1200mm
10.Laser positioningto make it precise.
红外灯定位
11.PLCprogramming controlling
PLC 程序设计控制
12. Need air supply，air tube dia 8mm
启动需要气源，气管直径8mm
13. The sampling machine uses drilling and milling, to avoid sample deformation, to ensure test accuracy
该取样机采用钻铣方式，避免了样片变形，保证测试准确度
