BAY15 Go Gauge for Caps on Finished Lamps
According to standard IEC 60061-3
PURPOSE: To check dimensions A max., D1 min., D1 max., L max. and the angular displacement of the pins of caps BAY15 on finished lamps.
TESTING:
a) To check dimension A max. and the angular displacement of the pins.
With the cap entering the gauge at surface W and the pins locating in the slots provided, it shall be possible to insert the cap to such a depth that the reference (lower) pin is below surface Y.
To check this, the cap is rotated through approximately 90°in the appropriate direction until the pin is visible in the cutaway.
b) To check dimensions D1 min. and D1 max.
At the successful completion of the test to check dimension A max. in a) above and with the cap still in the gauge, a pull is applied to the cap to bring the upper surface of the reference pin into with surface Y. With the cap in this position, the contact making surfaces shall be co-planar with or project beyond surface X but they shall not project beyond surface Z.
c) To check dimension L max.
With the cap held in the gauge as in b) above with the reference pin visible in the cutaway, the cap is rotated slowly while under tension until the reference pin is not visible in the cutaway.
During the transition, no obstruction to rotation shall be feli.
关于我们
深圳市创鑫仪器有限公司是一家致力于检测试验设备设计、生产和销售为一体的高科技企业，公司产品主要有四大类：
1.燃烧试验检测设备：水平垂直燃烧试验仪、针焰试验仪、漏电起痕试验仪、灼热线丝试验仪、单根电线电缆垂直燃烧试验仪；
2.电器防护及可靠性检测产品：弹簧冲击锤、球压试验仪、标准试验指针销、试验弯指、UL试验指、试验指甲、试验直指、试验棒、探针、稳定性试验台、拉力试验机、滚桶跌落试验机、插拔力试验机、开关按键寿命试验机等；
3.电气安规测试器：耐压测试仪、接地电阻测试仪、绝缘电阻测试仪、泄漏电流测试仪、LCR数字电桥、示波器、插头插座量规、灯头灯座量规及其它各类量规；
4.各类非标检测设备：可根据GB、IEC、UL等标准定做各类非标设备。
公司一贯坚持“质量，用户至上，优质服务，信守合同”的宗旨，凭借着高质量的产品，良好的信誉，优质的服务，产品全国近三十多个省、市、自治区以及远销英国、美国、德国等国家。竭诚与国内外商家双赢合作，共同发展，共创辉煌！
