USB CONTROL INTERFACE LUCI-10
§ Compact digital I/O interface for USB remote control of FEMTO amplifiers and photoreceivers
§ FEMTO放大器和光信号接收器USB遥控紧凑型数字I / O接口
§ Supports opto-isolation of amplifier signal path from PC USB port
§ 支持从PC的USB端口光隔离放大器的信号路径
§ Bus-powered operation
§ 总线供电操作
§ System driver, application software and VI's for use with LabVIEW™ Included
§ 包括LabVIEW™ 系统驱动程序,应用软件和VI'S的使用权
FEMTO放大器和光接收器遥控器
除了手动控制元件,许多FEMTO放大器和光接收器配备了用于所有主要功能遥控器的数字接口。 根据型号的不同,增益和过滤器设置可进行远程控制和状态信息例如过载或解锁可从设备中读取。这是在自动测量系统或特别有用于遥感难以进入的地方。
LUCI-10 USB控制接口是设置FEMTO装置跟标准WINDOWS电脑USB接口之间的联系。该接口总线供电,通过USB端口以及电子件是由D-SUB盒盖*整合的。因此,一个非常紧凑且易于使用的忌口接口解决方案即可实现。 Model LUCI-10 Bus Interface USB 2.0 (full-speed) Digital I/O Interface 16 output lines, 3 opto-isolated input lines Supply PS USB bus powered Connectors USB type A and D-Sub, 25 pin, male Case Zinc die-cast hood, nickel plated, with jack screws, weight 130 g (0.3 lb.) Software, Included on CD Device driver for Microsoft® Windows PC, System Requirements Microsoft® Windows XP SP 3 or higher, Optional Requirements For development of own application programs a development environment like LabVIEW™ Version 2012 (or higher) or C/C++ is required.
Dynamic link library (DLL),
Graphical user interface (GUI) programs,
Sample VI's and FEMTO Library for use in LabVIEW™
Intel Pentium III or AMD Athlon or better,
1 GB RAM or more,
5 GB of hard disk space,
USB 1.1 or 2.0 port