The design and manufacture of copper foil peel strength tester (Copper Foil Peel Strength Tester) 2.4.8 and 2.4.9 of IPC-TM-650 Test Methods Manual professional for copper-clad laminates and printed circuit board industries experimentaloutdoor measuring the peel strength of the flexible sheet
and the rigid panel of copper foil. PCB manufacturers to choose the best products. The structure is simple, easy to operate,
and can be placed on the work bench trial. The use of electronic control systems, the governor speed control motor rotation,
and then, after the shift mechanical reducer drive beams rise and fall of the Tscrew vice driven to complete the tensile or
compression tests. Force value by pushing or pulling force feedback, the test speed realtime display. The machine can be used
to test materials, finished products, tensile structures, compression, tearing, peeling strength, widely used in wire and cable,
plastic film, rubber products, textiles and leather, clothing footwear, automotive accessories, hardware accessories and more
the seed industry, quality management, physical property test of basic equipment.
一．铜箔抗剥离强度测试仪主要技术指标
1. *大试验力：500 N 力表能力：可选择0-1kg，0-5kg，0-10kg，0-15kg的力表。
2. 测试误差：±0.5%
3. 剥离速度：50mm/分（2"/分）
4. 试验行程：100mm
5. 速度精度：±1%
6. 力值分辨率：0.1N
7. 测试方式：电子控制，点动/自动切换
8. 电源：220V
9. 外形尺寸：310*410*500mm（W×D×H）
10.净重：16kg
11.专业用于测量刚性覆铜板上的铜箔抗剥离强度，配备刚性试样夹具小台车
★.The main technical indicators
1.maximum test force: 500 N force table capacity: selectable 0-1kg ,0-5kg ,0-10kg ,0-15kg of force table.
2.Test error: ± 0.5%
3.Peel speed: 50 mm / min (2 "/ min)
4.Experimental stroke: 100 mm
5.Speed accuracy: ± 1%
6. Force value Resolution: 0.1N
7.Test ways: electronically controlled, jog / automatic switching
8.Power supply: 220V
9.Dimensions: 310 * 410 * 500 mm (W × D × H)
10.Net weight: 16kg
11.The professional foil peel strength measurement rigid CCL fixture with rigid sample small trolley
二．铜箔抗剥离强度测试仪主要功能与特点
1.力值数字液晶显示，可辨别拉力或压力，液晶界面清楚易读 ；
2.负荷瞬间值、负荷峰值保持、负荷峰值延时保持三种显示模式；
3.三种计量单位：N-Kgf-Lbf可选并能自动互换；
4.负荷上下限值设定，可执行GO、NG的判定；
5.液晶显示带背光照明，可在光线不足的环境中使用；
6.负荷超载有蜂鸣警报、指示灯变红、屏幕显示三种方式警示；
7.单次测定，即可读取拉、压两个方向的峰值，并可自动和手动清零；
8.带行程限位及过载停机功能。
9.采用USB数据连接线，可与电脑联接使用，使用软件进行统计分析及拉力图表即时显示。
★.Main functions and features
1.The force value digital LCD discernible tension or pressure, liquid crystal interface is clear and easy to read;
2.Load instantaneous value, the load peak hold, the load peak delay maintain the three display modes;
3.Three units of measurement: N-Kgf-Lbf optional and can automatically interchangeable;
4.The load of the upper and lower limits set executable GO, NG judgment;
5.LCD with backlight, can be used in low-light environments;
6.Overload buzzer alarm indicator light turns red, the screen shows three ways alerts;
7.Single determination, you can read pull peak pressure in both directions, and can automatically and manually cleared;
8.With stroke limiter and overload shutdown feature.
9.USB data cable can be connected with computer use, the use of software for statistical analysis and Rally chart real-time display.
