电动折弯机工作原理：
1.Laid firmly fixed samples assigned to the base plate
2.Fixed distance control :tailored to the distance spcified by moving the pusher UNIT fisde lever.
3.Using cut height adjustment ,adjust the height of the sample push rod untill it touches the sample.
4.Speed controller to specify the speed to match the volume using the lever on the grid alignment (set the table below)
电动折弯机判断基准：
Test Method
Test the method and order of the methods listed
above settings are the same
Verdict standard
Details of Samsung or Ship SFEC test specification must be followed
Equipment Operation Processor
AC Mator rotational movement of the gear by rorating the pusher the sample should be banding
Sample is fixed on the base .the constans power and speed pusher deflection occurs and check the changes of the resulting samples
Material:aiuminum /sus303/profile
Size:440mmL*320W*500H
Weight:20KG
electrical :220V.60HZ.25W
