本站客户服务
仪表网官微
仪表APP
仪表手机版
仪表小程序
德国倍加福10-15631_R-1024增量旋转编码器
工业标准外壳 ∅58 mm 最高 5000 ppr 伺服法兰、方形法兰或夹紧法兰 按需提供带特殊轴的特殊法兰 不锈钢型 10 V ...30 V，具有带短路保护的推挽输出
德国倍加福10-15631_R-1024增量旋转编码器德国倍加福10-15631_R-1024增量旋转编码器
DescriptionPractical applications have shown again and againthat standards are useful and beneficial. There arealways applications, however, in which the desiredresult cannot be obtained with a standard incremental rotary encoder.Even the mechanical interface varies quite often inaccordance with the overall conditions of the application, as is shown by an example:If you intend to use the incremental rotary encoderwith a measurement wheel, we recommend a shaftdiameter of 10 mm. Standardisation prescribes aclamping flange in this case. This will be useful inmost cases, but not in all.Series 10 allows you to create individual combinations of specific features. In this way, the shaft witha diameter of 10 mm from the example can also becombined with a square flange.Normally, the housing of an incremental rotary encoder is manufactured from an aluminium cold extrusion part. For series 10, the housing is producedfrom a zinc pressure diecast. This gives an extra level of sturdiness to the incremental rotary encoder.If a pressure diecast housing is not sufficient, thehousing and flange can also be manufactured fromstainless steel.Up to a limit of 1500 pulses, the pulse disk is designed using plastic. In addition, pulse disks are alsomanufactured from glass.These properties make series 10 the most versatileof our incremental rotary encoders with a diameterof 58 mm.
