氙灯老化试验箱采用能模拟全阳光光谱的氙弧灯来再现不同环境存在的破坏性光波，可以为科研、产品开发和制冷控制提供相应的环境模拟和加速试验，氙灯老化试验箱可用于新材料的选择，改进现有材料或评估材料组成变化后耐用性的变化等试验，设备可以很好的模拟在不同环境条件内，材料暴露在阳光下所产生的变化。
Xenon lamp aging test chamber the simulation and reproduction in different environments are destructive wave of xenon arc lamp in the full spectrum of sunlight, can provide the corresponding simulation environment and accelerated test for scientific research, product development and quality control. Xenon lamp aging test box can be used for the selection of new material, improvement of existing materials or materials with different composition changes of durability test. The equipment can be well simulated in different environmental conditions, the change of material produced in the sun exposure.
设备特点：
全光谱氙灯/可选择的过滤系统（玻璃窗和紫外线过滤）长效的过滤器为保持所需的光谱提供保障
水喷淋功能/相对湿度控制/试验箱空气温度控制系统
·氙灯灯管安装容易，使用方便，基本上不需要日常维护的特点
氙灯灯管的使用寿命取决于所使用的辐照度水平，一般灯管寿命为2000小时左右
Equipment characteristics
Full spectrum filtering system / optional xenon lamp (glass window and UV filter)
Long acting filter In order to keep The required spectra provide protection
Water spray function / relative humidity control / test chamber air temperature control system
Xenon lamp is easy to install, easy to use features, basically do not need maintenance
Xenon lamp life depends on the irradiance level, the general lamp life is about 2000 hours or so
设备主要功能及使用范围（Main function and application range of equipment）
氙灯老化试验箱广泛应用于塑料、橡胶、涂料、纺织品、汽车内饰、汽车配件、电子电工产品等等高分子材料暴露在日光、冷热、风雨等气候条件下的耐久性性能测试。
Xenon lamp aging test box is widely used in plastics, rubber, paint, textiles, automotive interior, auto parts, electronic and electrical products and so on polymer materials exposed under the sunlight, heat and cold, wind and rain and other weather conditions the durability performance test
型号 Model | F/XD-150L | F/XD-150L | F/XD-225L | F/XD-408L | F/XD-800L | F/XD-010L | |||||||
电源 power supply | AC 380V 50HZ | ||||||||||||
性能 参数
| 辐照度范围 Irradiance range | 550W/1100W/m2 | |||||||||||
温度范围Temperature range | RT+10~70℃ | ||||||||||||
黑板温度Temperature blackboard | 63℃±3℃ | ||||||||||||
湿度范围Humidity range | 40%RH~98%RH | ||||||||||||
暴晒/雨水周期 Exposure / rain cycle | 60min/12min，108min/12min 可选（Optional） | ||||||||||||
湿度偏差Humidity deviation | +2，-3%RH | ||||||||||||
波动度Temperature fiuctuation | ≤±0.5℃ | ||||||||||||
均匀度Temperature uniformity | ≤±2.0℃ | ||||||||||||
温度偏差Temperature deviation | ≤±2.0℃ | ||||||||||||
升温时间 Heating rate | 3~5℃/min | ||||||||||||
降温时间 Cooling rate | 0.7~1℃/min | ||||||||||||
制冷 系统 | 制冷系统 Refrigeration system | 机械压缩机 单级制冷（风冷） Mechanical compressor Single stage refrigeration (air cooling) | |||||||||||
压缩机 Compressor | 半封闭压缩机 Semi-hermetic compressor | ||||||||||||
氙灯 光源 | 氙灯灯管Xenon lamp | 美国Q-lab（American Q-lab） | |||||||||||
辐照计Irradiatometer | 探头式辐照计Probe type radiation meter | ||||||||||||
灯管功率Lamp wattage | 1.8kw/根（only） | ||||||||||||
氙灯波长Xenon lamp wavelength | 290~800nm | ||||||||||||
过滤器Filter | 255nm以下0%，400~800nm以上90%/ 255nm the following 0%, 400~800nm more than 90% | ||||||||||||
灯管使用时间Lamp use time | 1800~2000小时/ hour | ||||||||||||
温湿度传感器 Temperature and humidity sensor | 铂电阻 PT100 铂电阻 PT100 | ||||||||||||
样品架Sample holder | 转盘式/1转/分钟，365度旋转 / Turntable 1r/min，635°rotate | ||||||||||||
实验室观察窗 Laboratory observation window | 双层钢化玻璃，带导电功能 Double layer tempered glass, with conductive function | ||||||||||||
控制器 Controller | 控制器：真彩触摸屏/中文或英文输入/历史曲线记录/PID自整定/光照度可显可调 Controller：TFT touch screen/Chinese or English language/data record function/PID AT/ Light illumination Can display Adjustable | ||||||||||||
内容积 Interior capacity（L） | 150L | 225L | 408L | 500L | 800L | 010L | |||||||
内尺寸 Interior dimensions（mm） | D | 600 | 500 | 600 | 700 | 800 | 1000 | ||||||
W | 500 | 600 | 800 | 800 | 1000 | 1000 | |||||||
H | 500 | 750 | 850 | 900 | 1000 | 1000 | |||||||
重量 weight（KG） | 待定 | ||||||||||||
满足执行标准：
GB2423-24-1995模拟地面上的太阳辐射
GB2424.14-1995太阳辐射试验导则
ISO 4892-2:2006 塑料 实验室光源暴露方法 第2部分：氙弧灯
ISO 11341-2004 色漆和清漆.模拟气候及模拟辐射曝晒.氙弧灯曝晒
ASTM G155-05a 非金属材料曝光用氙弧光仪操作的标准规程
ASTM D2565-99 户外用塑料的氙弧型曝光装置的标准实施规范
ASTM D4459-06 室内用要求曝露于氙弧灯的塑料标准实施规程
ASTM D6695-03b 清漆和相关涂覆料的氙弧曝光的标准实施规范
安全配置：漏电保护、短路保护、压缩机超压保护、压缩机过载保护、风机过载保护、超温保护、相序/缺相保护等
如果以上规格的产品不能满足您的需要，您可提供技术参数，我们为您提供定制方案，让您选择！免费：！我们将竭诚为您服务！
