本站客户服务
仪表网官微
仪表APP
仪表手机版
仪表小程序
| 美国uniwest涡流航空检测仪,EVi UNIWEST EVi-随着表面成像的功能优化uniwest探伤的精度 |
UNIWEST EVi-随着表面成像的功能优化uniwest探伤的精度 |
为了保持我们不断提高无损检测的精度和效率的传统，uniwest的电子商务解决方案团队开发的技术最 *、操作简易的便携式涡流检测系统— the EVi。 Evi优点：
工业应用：
|
| 工程由uniwest EC解决方案团队，在美国制造，EVi直接与探头和附件的eddyview。 uniwest的阵列的标准和可选的信号处理，读出，数据存储、报警和显示。 功能设置灵活应用的一个新的标准，使用方便，数据的解释和整体操作的准确度比以往 任何时候都可能在一个便携式检测系统。 |
GENERAL
Dimensions
• (WxHxD): 13.8" x 8.75" x 2.58"
• Weight: 7 lb 0 oz without batteries, 9 lb 2 oz with 2 batteries Display Size and Resolution
• 10.1" WXGA 1280x800 pixels Operating temperature
• 0 – 45ºC minimum when the battery is charging. 50ºC when operating with a battery or AC but not both.
MEASUREMENTS
• Frequency Range: 120 Hz to 15 MHz
• Gain: 0 dB to 114 dB in 0.1 dB steps
• Rotation: 0 degrees to 359.9 degrees in 0.1 degree steps
• Sweep: 0.001 second to 10 second per division
• Low Pass Filter: 0 to 10 kHz adjustable to 3 digits of precision
• High Pass Filter: 0 to 10 kHz adjustable to 3 digits of precision
• Probe Drive: 2 Vp-p, 4 Vp-p, 7 Vp-p (Also variable from 0 to 7 Vp-p in 1 percent steps)
• Probe Coupling: Monitors the probe to part coupling of a differential probe.
I N P U T S / O U T P U T S
• Power connector: 2.5mm IP68 Locking Connector
• Scanner/Probe Connector: 27 Pin IP68 Connector
• Probe types: Absolute and differential in either bridge or reflection configuration
• X and Y Analog Outputs: 2 SMA connectors for differential, absolute, or combination
• DB25 connector: 8 configurable encoder, sync or other inputs, 8 configurable alarm, multiplexer, or other outputs,
2 dedicated alarm outputs – TTL and open collector
• Alarm outputs: TTL & Open Collector (multi I/O), Audio or Headphone (USB to 3.5mm adaptor)
• Video output: USB will support external monitors (VGA, DisplayPort, or HDMI with adaptors)
• Ethernet: Remotely control the instrument and retrievedata in real time.
• USB port A: Interface to storage devices, keyboard
• USB OTG: Interface to OTG storage devices
• Exportable Files: Report files, data files, settings files
POwER
• Power adaptor requirements: 100-240VAC, 1.4A max
• Power connector: 10VDC-24VDC
• Available batteries: 1 or 2 Lithium DR202i or compatible
• Battery operating time: 5 hours minimum with most scanners, 4 hour recharge rate.
• Battery protection: SMBus V1.1 safety features. Monitor battery thermistors, disconnects, and circuit protection.
Batteries are hot swappable.
• Battery Charging: Instrument will charge batteries using external power
