Thorlabs 功率和能量计表头 带外部读出接口
PM103系列表头兼容我们所有的C系列光电二极管功率和热释电能量探头。
Thorlabs 功率和能量计表头 带外部读出接口
功率和能量计表头，用于光电二极管功率和热释电能量探头
● 兼容超过20种光电二极管功率和热释电能量探头
● 所有型号可以通过U,S,B 2.0工作
● 可选带有：
○ UART或RS232接口
○ 模拟输出
● 通过U,S,B(所有型号)或DA-15接头(仅PM103)供电
● 包含校准证书
PM103系列表头兼容我们所有的C系列光电二极管功率和热释电能量探头。我们标准的光电二极管、chao薄光电二极管、积分球和光纤探头总共可以测量从100 pW到20 W的光功率。另外，也可以使用 zui 大 光电流10 mA、不带放大且阳极或阴极接地的光电二极管。热释电能量探头可以测量从10 µJ到15 J的能量。也可以使用电压输出从20 mV到200 V的能量探头。虽然所有接口都可通过迷你U,S,B接口由PC进行操作和供电，但有些表头还有其他功能，如UART或RS232接口和模拟输出(请见右表)。带模拟输出的型号可以在连接电源时自动运行，无需额外的控制设备。所有表头都包含可以重启系统的重置按钮。
Thorlabs 功率和能量计表头 带外部读出接口
每个表头中的非易失性存储器在关闭或重启设备时会保留用户的波长设置、灵敏度范围和输出配置，适合长时间重复测量。100 kS/s的快速读取速率可以在使用表头的同时监测有源信号。对于 jing 确 测量，与只有4个电压范围和6个电流范围的PM100U,S,B相比，这些表头还有从20 mV到200 V的13个电压测量范围以及从2 nA到10 mA的21个电流测量范围(见规格标签)。
| Power Meter Interface Quick Comparisona | |||
|---|---|---|---|
| Item # | PM103 | PM103A | PM103U |
| Photo (Click to Enlarge) |  |  |  |
| Connectors | Mini U,S,B & DA-15 | Mini U,S,B & SMA | Mini U,S,B |
| Control / Digital Output | U,S,B 2.0, RS232, or UART | U,S,B 2.0 | U,S,B 2.0 |
| Analog Output | Yes | Yes | No |
有关功能的完整比较，请看型号比较标签。
PM103有2个可配置的通用数字接口DIO1(DA-15 Pin 2)和DIO2(DA-15 Pin 3)。类似地，PM103A有1个带SMA接头的辅助数字接口DIO1。以100 kS/s模式读出数据时，可以将DIO1接口配置为触发输出或输出。DIO2还可配置为pass/fail标志，并通过远程控制命令查询。
请注意，这些带接口的功率计表头不包含探头。有关兼容探头的信息，请参阅下面的探头描述。Thorlabs为功率计表头提供重新校准服务，可在下方订购(型号CAL-PM1)。另外，如果您有相应的探头需要重新校准，您可以将功率计表头与探头一起进行重新校准，无需额外费用。此外，我们提供U,S,B-ABL-60电缆作为每个探头所附带U,S,B电缆的替代品；此电缆包含一个M2.5锁定螺丝，以防止意外断开连接。
规格
| Sensor Compatibility | ||||
|---|---|---|---|---|
| Item # | PM101 Series | PM102 Series | PM103 Series | PM100USB |
| Sensor Compatibility | ||||
| Compatible Sensor Typesa | Photodiode Power and Thermal Power | Thermal Power and Thermal Position & Power | Photodiode Power and Pyroelectric Energy | Photodiode Power, Thermal Power, and Pyroelectric Energyb |
| Max Photodiode Sensor Current | 5 mA | N/A | 10 mA | 5 mA |
| Max Thermal Sensor Voltage | 1 V | 1 V | N/A | 1 V |
| Max Thermal Position Sensor Voltage | N/A | 1 V | N/A | N/A |
| Max Pyroelectric Sensor Voltage | N/A | N/A | 200 V | 100 V |
| Photodiode Sensor Current Input | ||||
| Units | W, dBm, W/cm2, A | N/A | W, dBm, W/cm2, A | W, dBm, W/cm2, A |
| Current Measurement Range | 6 Decades: 50 nA, 500 nA, 5 µA, 50 µA, 500 µA, 5 mA; Range Selectable in W, Sensor Dependent | N/A | 21 Ranges: nA: 2, 4, 10, 20, 40, 100, 200, 400; μA: 1, 2, 4, 10, 20, 40, 100, 200, 400; mA: 1, 2, 4, 10; Range Selectable in W, Sensor Dependent | 6 Decades: 50 nA, 500 nA, 5 µA, 50 µA, 500 µA, 5 mA; Range Selectable in W or A, Sensor Dependent |
| Current Display Resolution | 1 pA / Responsivity Value (A/W) | N/A | 1 pA / Responsivity Value (A/W) | 1 pA / Responsivity Value (A/W) |
| Current Measurement Uncertainty | ±0.2% Full Scale (5 µA - 5 mA) ±0.5% Full Scale (50 nA) | N/A | ±0.2% Full Scale (400 nA - 10 mA) ±0.5% Full Scale (2 nA - 200 nA); Item # PM103E: ±0.2% Full Scale (100 nA - 10 mA) ±0.5% Full Scale (2 nA - 40 nA) | ±0.2% Full Scale (5 µA - 5 mA) ±0.5% Full Scale (50 nA) |
| Analog Bandwidth | DC - 100 kHz (Dependent on Sensor and Settings) | N/A | DC - 150 kHz Item # PM103E: DC - 100 kHz (Dependent on Sensor and Settings) | DC - 100 kHz (Dependent on Sensor and Settings) |
| Wavelength Correction | nm (A/W) | N/A | nm (A/W) (Item # PM103E: Dependent on Sensor)c | nm (A/W) |
| Beam Area Setting | Diameter 1/e2 or Rectangular x,y | N/A | Diameter 1/e2 or Rectangular x,y | Diameter 1/e2 |
| AD Converter | 16 bit | N/A | 16 bit | 16 bit |
| Thermal Sensor Voltage Input | ||||
| Units | W, dBm, W/cm2, A | N/A | W, dBm, W/cm2, V | |
| Voltage Measurement Range | 9 Ranges: 2, 4, 10, 20, 40, 100, 200, 400, 1000 mV; Range Selectable in W, Sensor Dependent | N/A | 4 Decades: 1, 10, 100, 1000 mV Range selectable in W or V, Sensor Dependent | |
| Voltage Display Resolution | 1 µV / Responsivity Value (V/W) | N/A | 1 µV / Responsivity Value (V/W) | |
| Voltage Measurement Uncertainty | ±0.5% Full Scale (10 mV - 1 V) ±1% Full Scale (2 mV, 4 mV) | N/A | ±0.5% Full Scale (10 mV - 1 V) ±1% Full Scale (1 mV) | |
| Analog Bandwidth | DC - 10 Hz (Dependent on Sensor and Settings) | N/A | DC - 10 Hz (Dependent on Sensor and Settings) | |
| Wavelength Correction | Sensor Dependent; nm (V/W) | N/A | Sensor Dependent; nm (V/W) | |
| Beam Area Setting | Diameter 1/e2 or Rectangular x,y | N/A | Diameter 1/e2 | |
| Pyroelectric Sensor Voltage Input | ||||
| Units | N/A | N/A | J, J/cm2, W, dBm, W/cm2, V | J, J/cm2, W, W/cm2, V |
| Voltage Measurement Range | N/A | N/A | 13 Ranges: mV: 20, 40, 100, 200, 400; V: 1, 2, 4, 10, 20, 40, 100, 200; Ranges Selectable in J; Sensor Dependent | 4 Decades: 0.1, 1, 10, 100 V Range Selectable in J or V, Sensor Dependent |
| Voltage Display Resolution | N/A | N/A | 100 μV / Responsivity Value (V/W); Item # PM103E: 1 μV / Responsivity Value (V/W) | 100 µV / Responsivity Value (V/J) |
| Voltage Measurement Uncertainty | N/A | N/A | ±0.5% Full Scale (1 V - 200 V) ±1% Full Scale (20 mV, 400 mV); Item # PM103E: ±0.5% Full Scale (100 mV - 200 V) ±1% Full Scale (20 mV, 40 mV) | ±0.5% Full Scale |
| Trigger Level | N/A | N/A | 3% - 90% Full Scale | 0.1 % to 99.9 % Full Scale |
| Repetition Rate | N/A | N/A | Single Shot - 80 kHz, Dependent on Sensor | 3 kHz (Dependent on Sensor and Settings) |
| Wavelength Correction | N/A | N/A | Sensor Dependent; nm (V/W) | Sensor Dependent; nm (V/J) |
| Beam Area Setting | N/A | N/A | Diameter 1/e2 or Rectangular x,y | Diameter 1/e2 |
| AD Converter | N/A | N/A | 16 bit | 16 bit |
| Sensor Temperature Measurement | ||||
| Supported Temp. Sensor | Thermistor | |||
| Temp. Measurement Range | -10 to 120 °C | -10 to 120 °C | -10 to 120 °C Item # PM103E: -10 to 80 °C | -10 to 80 °C |
| Sensor Interface | ||||
| Connector | DE-9 Female | |||
a. 请看下方探头规格。
b. 由于此表头只能支持*高3 kHz重复频率，因此它不应与可探测高达10 kHz重复频率的ES408C探头一起使用。
c. PM103E接口对于带EEPROM的所有已校准探头可设为nm，对于没有EEPROM的客户搭建探头可设为A/W。
兼容探头概述
| Sensor Type | C-Series Photodiode Sensors, Photodiodes (Max 5 mA) | C-Series Thermal Power Sensors, Thermopiles (Max 1 V) | C-Series Thermal Position & Power Sensors | C-Series Pyroelectric Sensors, Pyros (Max 100 V) |
|---|---|---|---|---|
| Compatible Interfaces | PM101, PM101A, PM101R, PM101U, PM103, PM103A, PM103E, PM103U, PM100USB | PM101, PM101A, PM101R, PM101U, PM102, PM102A, PM102U, PM100USB | PM102, PM102A, PM102U | PM103, PM103A, PM103E, PM103U, PM100USBa |
| Wavelength Ranges | 200 nm - 5.5 µm | 190 nm - 20 μm | 190 nm - 20 µm | 185 nm - 25 μm |
| Power / Energy Ranges | 100 pW - 20 W | 10 μW - 200 W | 0.5 mW - 50 W | 10 μJ - 15 J |
a. 由于此表头只能支持*高3 kHz重复频率，因此它们不应与可探测高达10 kHz重复频率的ES408C探头一起使用。
b. 探头规格的完整列表请访问光电二极管功率探头、热敏功率探头、热敏位置&功率探头或热释电能量探头页面。其他信息请联系技术支持。
森泉为您的科研事业添砖加瓦：
激光控制：激光电流源、激光器温控器、激光器控制、伺服设备与系统等等
探测器：光电探测器、单光子计数器、单光子探测器、CCD、光谱分析系统等等
定位与加工：纳米定位系统、微纳运动系统、多维位移台、旋转台、微型操作器等等
光源：半导体激光器、固体激光器、单频激光器、单纵模激光器、窄线宽激光器、光通讯波段激光器、CO2激光器、中红外激光器、染料激光器、飞秒超快激光器等等
光机械件：用于光路系统搭建的 gao 品 zhi 无应力光机械件，如光学调整架、镜架、支撑杆、固定底座等等
光学平台：主动隔振平台、气浮隔振台、实验桌、刚性工作台、面包板、隔振、隔磁、隔声综合解决方案等等
光学y件：各类晶体、光纤、偏转镜、反射镜、tou射镜、半透半反镜、滤光片、衰减片、玻片等等
染料：激光染料、荧光染料、光致变色染料、光致发光染料、吸收染料等等
