参考标准 序号 | 标准 | 内容 |
1 | IEC 61851-1 | Electric vehicle conductive charging system-Part 1:General requirements 电动汽车导电充电系统-第1部分：一般要求 |
2 | IEC 61851-23 | Electric vehicle conductive charging system-Part 23:DC electric vehicle charging station 电动汽车导电充电系统-第23部分：直流电动汽车充电站 |
3 | IEC 61851-24 | Part 24:Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging 第24部分:直流电之间的数字通信。电动汽车充电站和用于控制直流充电的电动汽车 |
4 | IEC 62196-1 | Plugs,socket-outlets,vehicle connectors and vehicle inlets-Conductive charging of electric vehicles-Part 1:General requirements 第1部分：一般要求 |
5 | IEC 62196-3 | Part 3: Dimensional compatibility and interchangeability requirements for d.c.ａnd a.c./d.c. pin and contact-tube vehicle couplers 第3部分:用于d.c.及a.c./d.c.引脚及导电管汽车耦合器的尺寸兼容性及互换性要求 |
6 | ISO 15118-1 ISO 15118-2 ISO 15118-3 | Road vehicles一Vehicle to grid communication interface Part 1: General information and use-case definition Part 2: Network and application protocol requirements Part 3: Physical and data link layer requirements |
7 | SAE J1772 | SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler |
技术参数 | EVS-2000F-CCS1便携式直流充电桩测试仪 | |
| 被测输入 | 单枪，200A |
| 工作电源 | AC 85~260VAC; DC 12V |
| 电压 | 0-1000V |
| 电流 | 0~200A |
| 工作环境温度 | -20℃～+50℃ |
| 存储温度 | -30℃～+70℃ |
| 相对湿度 | 5％～90％ |
| IP防护等级 | IP20 |
| 内部通信方式 | PLC载波通信 |
| 内部通信规约 | HOME_PLUG GREEN PHY |
| 外部通信接口 | RS232 |
| 重量 | 10kg |
| 尺寸 | 440*600*222mm（宽深高） |
| 箱体颜色 | 7035电脑灰 |
| 显示方式 | 7寸触摸屏 |
