本站客户服务
仪表网官微
仪表APP
仪表手机版
仪表小程序
制造公司(MAKER): 韩国(KOREA)： TECHNOX
型号(MODEL) : TX-80(A-C)
A.产品特征(Features) ;
1. Manufacturing testing equipment based on vacuum insulation for high insulated
performance.使用隔热性能高的真空保温材料制造的实验机器。
2. Over eight times higher insulated performance compare to existing insulation.
比现有的保温材料高出8倍以上的隔热性能。
3. Maintaining the stable high precision for temperature and humidity.
对与温度湿度能维持稳定的高精密度。
4. Reliable testing equipment based on vacuum insulation with environmental friendly and high insulated performance.采用亲环境高隔热性能的真空保温材料的信赖性试验机。
5. Average diameter for silica basic particle of vacuum insulation is extremely small with 7~40nm and wide surface area with 50~380m2/g. Highest insulated performance display due to low thermal conductivity with three-dimensional type.
真空隔热材料的硅石基本粒子的平均直径为7~40mm，非常小，因为广泛的表面积 (50~380m2/g)和三元形态的特性，热传导率非常低，可以发挥佳的隔热性能。
6. Vacuum insulation with thermal conductivity of less than 0.0045W/mK Strengthens over eight times insulated performance compare to the same thickness "GA" class insulation.
真空隔热材料热传导率值为0.0045W/mK 以下，具有比同一厚度基准的 “甲”级隔热材料高出8倍以上的隔热性能 。
7. Reliable testing equipment based on vacuum insulation can reduce the thickness of insulated wall conspicuously due to maintaining over eight times for insulated performance compare to existing insulation and be more profitable for energy saving and utilization of the space and secure user space.
利用真空隔热材料的信赖性试验机器与原有的隔热材料相比具有8倍以上的隔热性能，减少隔热壁体的厚度不仅带来节能和利用空间的效果，而且还有利于确保使用空间。
B. 产品规格Specification;
1) 试验箱部件Chamber part)
- 内箱尺寸 Dimensions (in): 400 x 400 x 500 (W*D*H)mm
- 外部尺寸 Dimensions (out): 900 x 900 x 900 (W*D*H)mm
- 内部材料 Material ( in) : SUS 304 1.2T Polished plate
- 外部材料 Material (out) : Cold rolled steel plate with baked coating finish.
- 隔热材料 Insulations :vacuum insulation for high insulated Prformance(VIP) Poly-urethane foam & glass wool真空隔热材料(VIP) 聚氨酯 及玻璃纤维 。
- 试验箱门密封 Door packing : 双重硅酮密封 Silicon packing
2) 温度控制系统(Temp. Control system)
- 温、湿度试验范围 Test temp. range : -40℃ ~ 180℃ / 20% ~ 98%RH
-温湿度控制图：
- 温、湿度精密度Temp. & Humid. range : ±0.3℃ / ±1.5%
- 温、湿度均匀度 Temp. & Humid. Uniformity: ±1.5℃ / ±2%
- 温度上升比率 Temp. heat up rate : RT ~ 150℃ heating (1-3℃/min)（非线性）约35min
- 温度下降比率 Temp. Pull down rate : RT ~ -40℃ Cooling (0.7-2℃/min) （非线性）约45min
- 温度程序控制器 Temp. Program controller :
* Model : TH-500 * Maker: HANYOUNG NUX
* P.I.D 自动调整控制 P.I.D auto tuning control / alarm monitor system
* 99 Pattern / 800step
* 通讯 Communications: RS- 232/485
- 温度感应器 Temp. & Humid. Sensor : PT100Ω / Electronic type
- 加热器 Heater:
* STS pipe fin heater 2.0kW (TEMP)
* STS pipe sheathed heater 2.0kW (HUMID)
3) 循环系统 (Circulation system)
- 强热风扇 Sirocco fan: 3" x 6" x 4
- 循环电机Circulation motor : 60W x 2SET
4) Freezing System
- 双冷冻系统 Dual freezing system
- 制冷机 Refrigerant M/C: 1HP x 2SET
- 制冷剂 Refrigerant : R404a & R23
- 冷却系统 Cooling system: 空气冷却 AIR COOLED TYPE
5) 仪表板 Instrument panel
- 温度程序控制器 Program Temp. controller
- 主电源及箱内灯开关 Main & Lamp S/W
- 记录器 Recorder
- 透视窗 Viewing window: 400 x 500 x 38T
- 紧急开关Emergency
6) 安全装置 Safety device
- N.F.B
- 过热保护器 Over heat protector
- 电机过载继电器 Motor Over load relay
- 冷冻过载继电器 Refri. Over load relay
7) 保修 Accessories
- 电缆端口 Cable port: ￠50 x 1ea
- 搁板 Shelves: STS 不锈钢网式 STS mesh type x 2set
8) 记录器 Recorder
- 型号 Model: GR-100
- 2 数字点 2 point digital
- 制造公司 Maker : HANYOUNG NUX
9) 电源 Power source: AC 220V/50HZ 3Phase 4.0KW
10) 保证 Warranty
- 免费维修服务In the free repair service
- 提供目录 The manual offer
D. 其他事项(Remarks) ;
1) Original catalogue and specification are attached.
产品目录及使用说明书附表。
2) Installation and a test-run should be performed by a qualified engineer.
设置及试运转由专门领域的进行 。
3) two year warranty should be provided after the installation.
保修期为售后2年
4) Electrical service line contruction work to the installation on-site should
be done by the customer. 客户负责把电线设置在设备安装的位置。
5) IN-OUT piping work of water pipe system to the installation on-site should
be done by the customer. 需要供排水设施时，客户负责把进出水管道设置在设备安装的位置。
