通用传感器输入。
自动识别和配置到传感器变送器。
智能传感器配置在插件。
默认设置报警点和上载校准信息。
集成声报警和频闪。
本地或远程传感器安装。
用于安装在危险区域内的传感器头，而发射器在一个方便的地区远程显示。
4-20毫安和Modbus（RS - 485接口）输出。
115/230伏交流电操作与电池备份选项。
备用电池，确保保护，即使在电源
Transmitter, Horn, Strobe and Controller All-In-One!
- Universal Sensor Input
- Automatically recognizes and configures the transmitter to the sensor.
- Intelligent Sensors Configure upon Plug-in
- Setting default alarm points and uploading calibration information.
- Integral Horn and Strobe
- Local or Remote Sensor Mount
- For mounting the sensor head inside of a hazardous area while the transmitter remains in an easily accessible area.
- 4-20 mA and Modbus (RS-485) Outputs
- 115/230 VAC Operation with Battery Back-up Option
- Battery back-up ensures protection even during power failure.
SensAlarm is the easiest to install and most reliable single point monitoring system available! Connect power and plug-in the SensAlert® sensor, and SensAlarm will automatically configure the system for gas type, range, engineering units (PPM/%LEL) and default alarm levels.
With active temperature compensation, the sensors are virtually drift-free and provide significantly reduced maintenance. SensAlarm is the ideal fully integrated single point system for toxic and combustible gasses and Oxygen deficiency/enrichment hazards.
The non-intrusive, menu driven calibration provides fast functional checks (under 2 minutes), and the new calibration data is written into sensor nonvolatile memory. This feature also allows for shop calibration and hot-swapping in the field or at the position of installation. SensAlarm comes standard with a horn, strobe and three user configurable relays to maximize functionality.
Non-Intrusive User Interface
SensAlarm All-In-One Systems have a non-intrusive menu driven user interface designed for efficient set-up and maintenance. Applying a known zero gas to the sensor and touching ZERO with the magnet wａnd sets the zero. Touching the SPAN control with the magnet displays “Enter Value” and prompts the entry of the calibration gas concentration. The transmitter performs the span in 30-60 seconds. “Cal OK” or “Cal Fail” is displayed and the new calibration data is written into the sensors non-volatile memory.
SensAlarm is part of the SensAlert Series of gas detectors.
Introducing SensAlarm Battery Back-up
SensAlarm, the industrial all-in-one single point gas detector and controller, is now available with battery back-up. This feature provides protection for your employees and facility during instances of power loss. When power goes down SensAlarm continues to protect your employees and facility for up to 60 minutes. The battery back-up option can be supplied with a handle and line cord which makes SensAlarm ideal for applications in temporary work areas.Discover SensAlarm
Available sensors for SensAlarm
SensAlarm Documentation
Application Support
