该系列9510二氧化碳分析仪的设计提供连续，碳等气体二氧化碳自动测量。测量范围包括任何比例或追踪（PPM）的。在9510可用于应用中各点的现场监测的利益
The Series 9510 Carbon Dioxide Analyzer is designed to provide continuous, unattended measurement of carbon dioxide in other gases. Measuring ranges include either percentage or trace (PPM). The 9510 may be used for applications where spot monitoring of various points is of interest.
- Features and Benefits
- System Description
- Specifications
- Explosion Proof Version
- Options/Accessories
- Applications
- Download PDF Data Sheet
(Requires Adobe Acrobat Reader) - Contact Us
| Features | Benefits |
| State-of-the-Art Sensor Technology | High Precision Measurements |
| Three Alarm Relays | Easily Set Threshold Values |
| Rapid Speed of Response | Senses Changes in Gas Composition in Seconds |
| Audible & Visual Alarm Indication | Alerts User of Abnormal Operating Conditions |
| Optional RS-232 or 485 | Interfaces with Serial Communication Equipment |
| Rugged Polycarbonate Enclosure | Ideal for a Variety of Industrial/Commercial Applications |
System Description
The Series 9510 Carbon Dioxide Analyzer is designed to provide continuous, unattended measurement of carbon dioxide in other gases. Measuring ranges include either percentage or trace (PPM). The 9510 may be used for applications where spot monitoring of various points is of interest. The bench-top/portable enclosure can be equipped with optional battery operation making it ideal for remote monitoring. For safety related applications, the Series 9510 can be equipped with an open sensor diffuser that allows free movement of ambient air to the sensor without the use of a sample pump.
The focal point of the Series 9510 is its state-of-the-art sensor technology. Alpha Omega Instruments carbon dioxide sensor features a next generation NDIR (non-dispersive infrared) measuring system. The carbon dioxide sensor incorporates closed-loop control for enhanced long-term calibration stability. The control signal is generated by means of an optical referencing element that monitors source intensity.
Read more about sample system handling for carbon dioxide analyzers
This methodology, coupled with a novel source homogenizing gas sampling chamber, yields a system with greatly improved tolerance to changes in the infrared source outputs.
Back To Top
Specifications
Performance
Percent Ranges: 0-20, 0-10, 0-5
Trace Ranges: 0-5,000 PPM
Measurement Error:
- Percent: ± 5.0% of reading 0.15% of CO2, whichever is greater
- Trace: ± 110 ppm CO2 or ± 5% of reading,whichever is greater
Response Time: <35 seconds to a 63% step change
Sensor Type: Non-Dispersive Infrared
Temperature Compensation: Standard.Operation
Temperature Range: 40° to 100°F (5° to 38°C)
Sample Gas Pressure Limits: 0.1 to 2.0 psig
Sample Flow Rate: 200-500 ml/min. A constant sample flow of 200 ml/min + 10 ml is recommended
Warranty: Two years electronics and sensor
Electrical
Power Source: 115/230 VAC/50-60 Hz (Battery Powered Optional)
Analog Output: 4-20 mADC and 0-2 VDC (field scalable)
Optional Serial Communications: RS-232C or RS-485
Enclosure: Polycarbonate-rated NEMA 1
Display: 3-1/2 digit liquid crystal display
Dimensions: 10.9” H x 6.5” W x 6.0” D
Weight: 7.5 lbs. (Benchtop Configuration)
Oxygen Alarm Relays: Three (3) SPDT Form C contacts rated 10A @ 30VDC/115/230 VAC
Audible and Visual Alarm Indicators: Standard
Back To Top
Explosion Proof Version
Shown above is the Series 9510 Carbon Dioxide Analyzer with optional explosion proof (NEMA 7) enclosure along with a NEMA 7 remote display. The display can be mounted several hundred feet from the analyzer.
Back To Top
Options/Accessories
- Explosion Proof Enclosure
- Sample Pump
- Sample Filter
- Pressure Regulators
- Flow meters
- Battery Operation
- RS-232 or RS485
- Built-in Datalogger
Back To Top
Applications
- Food Processing
- Pharmaceutical Manufacturing
- Environmental Monitoring
- R&D
- Fermenters
- De-Coking Operations
