美国NDT James T-HT-1000 Humiditest混凝土钻孔湿度测试仪让从事混凝土工作的人监测及确保新建造的足够干透去进行下一步的加工。这对于混凝土建造, 特别是需要进行镀膜、铺地毯或相类的地板覆盖加工极为重要。进行上述的工装时, 若混凝土不足以干透, 会导致昂贵的覆盖工程失误。要确保混凝土足够干透, 避免重复昂贵的工序, 必须使用钻孔湿度测试系统, 例如T-HT-1000 Humiditest混凝土钻孔湿度测试仪。
Humiditest System™
The tailor made solution for measuring bore hole humidity in hardened concrete.
Purchasing Notes
· Consumables:
o T-HT-1300 Protective Cover with Lid
o T-HT-1301 Rubber Plugs
Applications
· Floor Coatings
· Concrete Overlays
Features & Benefits
· Ensures Structure is dry before starting next construction phase.
· Uniquely designed system to handle concrete bore hole humidity measurements.
· Re - usable Probe for improved economics.
· Rapid Response Time of Probe.
· High accuracy and Long term Stability of Probe.
· Conforms to ASTM Standard F-2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs.
The James Instruments Humiditest™ System allows the concrete practitioner to monitor and ensure that a new structure is dry enough to proceed with the next phase of construction. This is especially critical for concrete structures requiring a coating, carpeting or similar floor or covering treatment. Installing such treatments before the concrete is sufficiently dry will typically cause expensive failures in the covering treatment. The only accurate way to ensure that the concrete is sufficiently dry enough to safely avoid expensive re-work is via a bore hole humidity test system, such as the Humiditest System™.
The system works by first boring a hole into the concrete and inserting a plastic tube in the hole. The plastic tube is then plugged and the system is set to stabilize and the humidity to reach equilibrium. The probe is then inserted into the plastic tube, left to stabilize for a short period of time, and then a reading is taken.
The sleeve is recommended to give readings at various depths in the concrete. As concrete moisture distribution is typically very uneven it is recommended to take readings at different depths depending on the structures exposure.
Specifications
| Probe | |
| Measurement Range | 0…99% RH |
| Accuracy | |
| 0-90% | +/-2%RH |
| 90-99% | +/-3%RH |
| Long Term Stability | ( 1 Year ) 1%RH |
| Response Time (90% of Reading at 20° C) | 15 S |
| Response Time (Stabilized Hole, full reading) | 30min |
| Temperature Range | -20°C to +60°C |
| Sensor Diameter | 12mm |
| Cable Length | 0.3m |
| Probe Length | 69mm |
| Housing Material | ABS Plastic |
| Sensor Protection Membrane | Filter |
| Bore Hole Diameter | 16mm |
| Measurement Depth min. | 30mm |
| Meter | |
| Calculated Quantities | Dew point |
| Temperature | Absolute |
| Temperature | Wet Bulb |
| Temperature Resolution | 0.1%RH / 0.1°C |
| Power Supplies | 4 AA Batteries |
| Display | 2 line LCD |
| Approximate Weight | 300 g. |
以上是美国NDT James T-HT-1000 Humiditest混凝土钻孔湿度测试仪
美国NDT James相关产品介绍：
美国NDT James T-HT-1000 Humiditest混凝土钻孔湿度测试仪
美国NDT James T-C-10 T-C-20 Cementometer微波水泥含水率测试仪
美国NDT James T-S-30 Aquaprobe微波土壤含水率测试仪
美国NDT James T-M-170 Aquameter混凝土含水率测试仪
美国NDT James T-T-90 Trident插针式微波骨料含水率测试仪
美国NDT James I-CB-6000 Carbo Detect混凝土碳化深度酸碱指示剂
美国NDT James I-AS-3000 ASR-Detect混凝土碱骨料反应测试仪
美国NDT James A-AB-1200 A-AV-1300 A-AA-1100 Air Meters混凝土含气量测试仪
美国NDT JAMES Z-WP-1000 Windsor Probe混凝土强度枪击检测仪
美国NDT JAMES W-P-2000 Windsor Pin混凝土强度检测仪
美国NDT JAMES R-HR-8000 Mini R-Meter钢筋定位仪
美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪
美国NDT JAMES P-C-728 P-C-729 Anchor锚栓测试仪
美国NDT JAMES M-M-3056 Maturity Meter混凝土成熟度测试仪
美国NDT JAMES Datascan MK II钢筋混凝****达
美国NDT James C-P-6000 C-P-6050 Porosiscope混凝土渗气渗水性测试仪
美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪
美国NDT James C-CL-3000 Chlorimeter混凝土氯离子含量测定仪
美国NDT James W-M-350 W-M-250 Rebound Hamme机械回弹仪
美国NDT James W-D-2000 Rebound Hamme数字回弹仪
美国NDT James V-E-1000 E-Meter MK II动态弹性模量测试仪
美国NDT James V-V-100 Vu-Con冲击回波测试仪
美国NDT JAMES V-C-400 V-Meter MK IV混凝土超声波测试仪
美国NDT James C-CS-8000 C-CS-8300 Gecor 8钢筋锈蚀程度测定仪
美国NDT James C-RM-8000 Ohmcorr混凝土电阻率测定仪
美国NDT James C-CM-5000 Cor-Map II大屏幕半电池电压钢筋锈蚀检测仪
美国NDT JAMES R-C-400/450/475/410 Rebarscope钢筋扫描仪
