The SYNTEL System可寻址灾害事件监测系统，回声 2/4 是墙装载控制面板提供用于轻型工业应用的成本效益解决方案。单位结合直观的界面，提供低成本维护了易于安装
Syntel 是一个可寻址系统适合在区域 1 和 2 危险区域中使用。完整的可寻址厕所是容错与短或打开电路正常运行。Syntel 并没有一个 CPU，所以有没有共同的功能衰竭点。它包括一个标准的 OPC 接口，也可提供由 Modbus 允许与第三方系统轻松集成
- No central processing unit (CPU)
- Addressable gas, flame and third party instrumentation
- Fault tolerant
- Simple system configuration
- Flexible system design
- User friendly, client specific interface
- 总览:
-
Addressable hazard event monitoring system.
Syntel integrates a wide range of hazardous area devices on a secure, fault tolerant addressable network. Standard and client specific HMI's are available along with communication interfaces to third party systems.
Syntel is an addressable system suitable for use in zone 1 and 2 hazardous areas. The complete addressable loo is fault tolerant operating normally with a short or open circuit. Syntel does not have a CPU, so there is no common failure point. It includes a standard OPC interface and can also be supplied by Modbus allowing easy integration with third party systems.
Syntel stores alarm and calibration information in distributed non-volatile memory, hence there is no reliance on a centralised system.
Syntel is ideal for installations where there is the possibility for future expansion. The system architecture allows very low cost expansion as cable runs to a central location are not needed.
描述:
Innovative TechnologyThe system works with distributed intelligence under SYNTEL LonWorks® Protocol. All security features, alarms and interlocks are managed directly from remote sensors to relay housings and systems-
The vast array of detectors which can be connected ( gas detectors, flame detectors, sensors, analog inputs & outputs) and its reliability and precision of it's communication guarantee a complete system. With it's ring topology (network loop), the Syntel System offers easy installation with reduce wiring costs, installation and the ability to cover huge areas.
连网:
The Syntel System - a system that adapts to each individual siteSuitable for small to medium sites
Suitable for medium to large sites
.
This configuration is suitable for very large sites that do not have local area outside nearby.
Each box of distribution of loops allows a deployment area of 5 network loops.
接口:
Syntel system - User friendly interface
The proposed supervision displays on screen one or more dynamic bearing synoptic conditions and measurements of gas detectors or flame site.
This friendly supervision has a main block where the entire detection is shown in background map of the site and several synoptic more detailed.
Each detector is shown as an animated icon that allows you to quickly define its state (color change, green: active, orange: default, red: alarm).
Gas concentration measured by the detector always appears next icon for gas detectors.Dynamic operating security features
General interactive visualization, area or detector
- Topology detection system
- Instantaneous gas concentration or as history
- Setting and Resetting Alarms
- Identity and status of remote sensors or other subscribers
Powerful tool for maintenance and diagnostics
Access authorization levels
- State and system integrity
- Comprehensive and detailed diagnosis of the state of operation of remote sensors or other subscribers
- Setting the platform SYNTEL
- Substitute function of a telecoil
文档:
Product Sheet Syntel System637.04 KB
Product Sheet Syntel Devices381.23 KB
应用:
• Oil refinery
• Chemical and petrochemical industry
• Off shore
• LNG & LPG storage
• Power stations
