DAQ970A DAQ970A 数据采集系统

Keysight DAQ970A 数据采集系统 主要特性与技术指标

• 配有 USB 和 LAN 接口的 3 插槽主机

• 6 1/2 位（22 比特）内置数字万用表与新的固态多路复用器模块结合使用，每秒最多可以扫描 450 个通道

• 8 种开关和控制插入式模块可供选择

• 内置信号调理功能可以测量热电偶、RTD 和热敏电阻、直流/交流电压和电流、电阻、频率和周期、二极管测试和电容

• 非易失存储器可存储 10 万读数，并在断电时保留数据

• 每个通道都有上下限报警功能，以及 4 路 Hi/LO 报警输出

• 支持 BenchVue 软件：BenchVue DAQ 控制和分析应用软件支持您无需编程即可生成测试

Keysight DAQ970A 数据采集系统 描述

获得由 3 插槽主机和 8 个可选插入式模块组成的新一代数据采集（DAQ）系统。您可以通过 Keysight BenchVue DAQ 软件、直观的图形前面板（包括面向任务的自学手册）或网络浏览器来操作这个 DAQ。

• *的 6½ 位内置数字万用表提供更出色的精度和更快的测量速度

• 能够测量超小电流（1 μA 直流 100 μA 交流）和更高的电阻（1000 MΩ）

• 新自动校准功能可以补偿由于时间和温度变化所产生的内部漂移

• 3497XA 一致性测试、程序和配置

以及

• 所有模块均经过更新，进一步提高了开关速度和测量精度

• 新 DAQM900A 固态多路复用器的扫描速度高达 450 通道/秒

Keysight BenchVue DAQ 控制和分析应用软件可与 DAQ970A 结合使用。BenchVue 为您提供直观的用户界面，方便您执行测试配置和实时数据显示与分析。BenchVue 支持您快速设置和执行测量，以及通过各种显示类型导出数据或记录和查看实时测量结果，从而更快地解释数据。BenchVue 软件还支持许多其他是德科技仪器，让您通过单一界面即可监测是德科技的大部分仪器。

Main characteristics and technical indexes of keysight daq970a data acquisition system

3-slot host with USB and LAN interface

The 6 1 / 2-bit (22 bit) built-in digital multimeter can scan up to 450 channels per second in combination with the new solid-state multiplexer module

Eight switch and control plug-in modules are available

Built in signal conditioning function can measure thermocouple, RTD and thermistor, DC / AC voltage and current, resistance, frequency and period, diode test and capacitance

Nonvolatile memory can store 100000 readings and retain data in case of power failure

Each channel has upper and lower limit alarm function, and four hi / Lo alarm outputs

Support for benchvue software: benchvue DAQ control and analysis application software enables you to generate tests without programming Description of

keysight daq970a data acquisition system

A new generation DAQ system composed of 3-slot host and 8 optional plug-in modules is obtained. You can operate this DAQ through keysight benchvue DAQ software, intuitive graphic front panel (including task-oriented self-study manual) or web browser.

Advanced 6 ½ Bit built-in digital multimeter provides better accuracy and faster measurement speed

It can measure ultra-small current (1 μ A DC 100 μ A AC) and higher resistance (1000 m Ω)

The new auto calibration function compensates for internal drift due to time and temperature changes

3497xa conformance testing, program and configuration

as well as

All modules have been updated to further improve the switching speed and measurement accuracy

The new daqm900a solid-state multiplexer has a scan speed of up to 450 channels per second

Keysight benchvue DAQ control and analysis application software can be used in combination with daq970a. Benchvue provides an intuitive user interface for you to perform test configuration and real-time data display and analysis. Benchvue enables you to quickly set up and perform measurements, export data or record and view real-time measurement results through various display types, so as to interpret data more quickly. Benchvue software also supports many other st instruments, allowing you to monitor most of ST's best-selling instruments through a single interface.