Features：
1、Precise control of microcomputer, digital display temperature, the inside temperature at a glance。
2、When the time is controlled by a programmable controller, timing cycle clock. Microcomputer automatic control, easy to operate; programmable multi-stage control, day and night can be individually set the temperature, humidity, light intensity and time。
3、Machine handsome in appearance, reliable performance, automatically adjustable light intensity。
4、External doors and translucent glass, good insulation to reduce heat incoming incident light, but to meet the required sample indoor illumination, while allowing observation of。
5、Heating system uses high-performance heating element。
6、Machine with advanced technology manufacturing, elegant style box。
7、Equipped with casters for easy movement, to facilitate the placing and maintenance。
8、Box of high quality structural steel, coated by the advanced technology imported matte spray paint, surface color and soft, impact-resistant, corrosion-resistant。
9、High-quality steel wire shelves, easy access to goods, and easy to clean。
10、Sensor with ultra-mild abnormal protection, ensure safety equipment and samples; matching full spectrum of plant growth lamps, help plant growth, increase disease resistance。
11、Power Failure Memory, Power-down time of automatic compensation; temperature control system, fast response, high accuracy temperature control。
12、Air duct ventilation, studio soft wind speed, temperature uniformity
Use Explain：
1、Power on, close the power switch, machine power, switch the power indicator light。
2、Temperature setting, please refer to the instructions of inligent digital temperature controller.
3、If you need lighting，please turn on light switches。
4、The incubator has a breakpoint protection and about a minute and a half delay function, the compressor starts again after shutdown to reach about one and a half minutes。
Care and maintenance：
1、Incubator enclosure, proper grounding。
2、Incubator to be placed in a cool, dry, well ventilated, away from heat and sun areas. Place a smooth, to prevent the noise of vibration
3、To ensure efficient cooling condenser, condenser and the distance between the wall should be greater than 100mm. Box side of the gap should be 50mm, the top box at least 300mm space。
4、Incubators in the handling, maintenance, should avoid collision, shaking vibration; maximum gradient is less than 45 degrees.
5、Instrument suddenly not working, check the fuse tube （box back） is burnt out, check the power supply situation。
6、when the incubator refrigeration，Box should not make the difference between the temperature and the ambient temperature is greater than 25 degrees。
| Model | Volume | Dimensions | Temperature range | Temperature accuracy | Temperature fluctuation | Temperature uniformity | Illumination |
| SG-2501A | 50L | 450×460×550 | 0-50℃ | ±0.1℃ | ±1℃ | ±1℃ | 0-5000LX |
| SG-2501B | 100L | 450×460×820 | 0-50℃ | ±0.1℃ | ±1℃ | ±1℃ | 0-5000LX |
Note: The above parameters are subject to change without notice, product replacement fast, apparatus and legend if access, please take the material object.
