VariTrans P41000 德国科尼克VariTrans P41000隔离器(KNICK)

Inputs

P41000 D1

±60 mV, ±90 mV, ±150 mV, ±300 mV, ±500 mV, ±10 V, factory setting: ±10 V

Calibrated range selection,

P41000 D1-nnn

60mV-100V, unipolar/bipolar

1to16 ranges to customer requirements, calibrated range selection

P41100 D1-nnn

60mV-100V, unipolar/bipolar

Fixed setting to customer requirements

Input resistance

Range ≤0.5 V

Approx. 100 kohms

Range >0.5 V ... 3600V

>2 Mohms

Input capacitance

Range ≤0.5 V

Approx. 10 nF

Range >0.5 V

Approx. 1 nF

Overload

Range ≤10 V

Limited to 36 V by suppressor diode, permissible continuous current = 20 mA

Range >10 V

Limited to 150 V by suppressor diode, permissible continuous current = 3 mA

Output

P 41000 D1

20mA, 10V unipolar/bipolar and 4-20 mA

Calibrated range selection, factory setting: ±10 V

P41000 D1-nnn

20mA, 10V unipolar/bipolar and/or 4-20 mA

Calibrated range selection, to customer requirements

P41100 D1-nnn

20 mA, 10 V unipolar/bipolar or 4-20 mA

Fixed setting to customer requirements

Offset

Factory setting up to ±150 %

Load

With output current

≤12 V (600 ohms at 20 mA)

With output voltage

≤10 mA (1000 ohms at 10 V)

Offset error

<20 µA or 10 mV

Residual ripple

<10 mV_rms

Gain error

<0.1 % meas. val.

Cut-off frequency (–3dB)

>5 kHz; optional factory setting: 10 Hz

Common mode rejection ratio

Input range ≤1 V

CMRR¹⁾

Approx. 150 dB (DC/AC: 50 Hz)

T-CMRR²⁾

Approx. 115 dB (1000 V, tr = 1 µs)

Input range >1 V

CMRR¹⁾

DC: approx. 150 dB

AC 50 Hz: approx. 120 dB

Temperature influence 3)

<0.005 %/K full scale

Power supply

20 ... 253 V AC/DC

AC 48 ... 62 Hz, approx. 2 VA; max. approx. 1.2 W

Galvanic isolation

3-port isolation between input, output, power supply

Test voltage

Calibrated range selection

10 kV AC across input and output/power supply

Fixed settings (Model P411xxD1)

15 kV AC across input and output/power supply

All models

4 kV AC output to power supply

Working voltage (basic insulation) to EN 61010-1

Calibrated range selection

Up to 2200 V AC/DC across input, output, and power supply with overvoltage category III and pollution degree 2 (fast transients max. 13.5 kV)

Fixed settings (Model P411xxD1)

Up to 3600 V AC/DC across input, output, and power supply with overvoltage category III and pollution degree 2 (fast transients max. 20 kV)

Rated insulation voltage to EN 50124-1

Calibrated range selection

Up to 2200 V AC/DC across input, output, and power supply with overvoltage category III and pollution degree 2

Fixed settings (Model P411xxD1)

Up to 3000 V AC/DC across input, output, and power supply with overvoltage category III and pollution degree 2

Protection against electric shock

Calibrated range selection

Safe isolation according to EN 61140 by reinforced insulation in accordance with EN 61010-1

Working voltages with overvoltage category III and pollution degree 2:

–up to 1100 V AC/DC across output and power supply

–up to 300 V AC/DC across output and power supply

Fixed settings (Model P411xxD1)

Safe isolation according to EN 61140 by reinforced insulation in accordance with EN 61010-1

Working voltages with overvoltage category III and pollution degree 2:

–up to 1100 V AC/DC across input and output/power supply

–up to 300 V AC/DC across output and power supply

For applications with high working voltages, you should ensure there is sufficient spacing or isolation from neighboring devices and protection against electric shocks.

EMC⁴⁾

Product standard EN 61326， Emitted interference: Class B， Immunity to interference: Industry

Surge withstand

5 kV, 1.2/50 µs, to IEC 255-4 (higher values upon request)

MTBF5)

Approx. 96 years

Ambient

Operation: –10 ... +70 °C

temperature⁶⁾

Transport and storage: –40 ... +85 °C

Design

Modular housing

Width 22.5 mm

with screw connectors

See dimension drawing for other measurements

Protection class

Housing IP 40, terminals IP 20

Mounting

Snap-on mounting on 35 mm top-hat rail according to EN 60715

Weight

Approx. 180 g