进口自吸式排污泵又称固液泵或杂质泵。该系列泵水力设计，叶轮是缩在单独的叶轮室内，连接叶轮室的是压水室，当叶轮旋转时，泵内液体产生强烈的轴向涡流作用，使进口造成真空，出口产生扬程。因而杂质可以从压水室排出，所以它的流道是畅通的，其排污效果是其他自吸式排污泵的。德国汉克生产的自吸式排污泵可像自吸清水泵那样不需要安装底阀，又可吸排含有大颗粒固体块、长纤维、沉淀物、废矿杂质、粪便处理及一切工程污水物。可广泛适用于市政排污工程、轻工、造纸、纺织、食品、化工、电业、石油、矿山和河塘养殖等行业。它是目前国际抽送固体颗粒、纤维、浆料和混合悬浮等介质的杂质泵。
适用范围
适用于化工、石油、制药、采矿、造纸、纤维、浆料、纺织、食品、电厂及市政排污工程、公共设施排污、河塘养殖等行业。
使用条件
1、环境温度≦50℃，介质温度≦80℃特殊要求可达200.℃
2、介质PH值铸铁材质为6-9，不锈钢为2-13.
3、介质重度不超过1240千克/m3
4、自吸高度不能超过规定值4.5-5.5米，吸入管长度为≦10米。
5、通过能力悬浮颗粒直径为泵口径的60%，纤维长度为泵口径的5倍。
产品优点
1、排污能力强：特殊的叶轮防堵设计，确保了泵高效且无堵塞。
2、高效节能：采用优秀水力模型，效率比一般自吸泵高3～5%。
3、自吸性能好：自吸高度比一般自吸泵高1米，且自吸时间更短。
技术参数
流量：5-800m3/h；
扬程：12-60m；
电机功率：2.2-132KW；
转速：1450-2900r/min；
口径：φ25-φ300；
介质温度：≤100℃；
自吸高度：4.5-6.0m。
Self-priming sewage pump, also known as solid-liquid pump or impurity pump. The series of pump hydraulic design unique, the impeller is reduced in a separate impeller room, connecting the impeller chamber is the pressure chamber, when the impeller rotation, the pump liquid produces a strong axial vortex effect, so that imports caused by vacuum, So the impurities can be discharged from the water chamber, so its flow channel is completely smooth, and its sewage effect is the other self-priming sewage pump unparalleled. Germany Hank production of self-priming sewage pump can be self-priming as the pump does not need to install the end of the valve, but also pumping with large particles of solid particles, long fiber, sediment, waste impurities, fecal treatment and all engineering sewage. Can be widely applied to municipal sewage engineering, light industry, paper, textile, food, chemical, electrical, oil, mining and pond farming and other industries. It is currently the best pumping of solid particles, fiber, slurry and mixed suspension and other media the best impurity pump.
The scope of application
Applicable to chemical industry, petroleum, pharmaceutical, mining, paper, fiber, pulp, textile, food, power plant and municipal sewage works, public facilities, sewage, pond farming and other industries.
Conditions of Use
1, ambient temperature ≦ 50 ℃, medium temperature ≦ 80 ℃ special requirements up to 200. ℃
2, the media PH value cast iron material for 6-9, stainless steel for 2-13.
3, medium heavy no more than 1240 kg / m3
4, self-priming height can not exceed the specified value of 4.5-5.5 m, suction pipe length of ≦ 10 m.
5, through the capacity of suspended particles diameter of 60% of the pump diameter, fiber length of 5 times the pump diameter.
product advantages
1, strong sewage capacity: a special impeller anti-blocking design to ensure that the pump is efficient and no clogging.
2, energy efficient: the use of excellent hydraulic model, the efficiency of self-absorption pump than the general 3 to 5%.
3, self-priming performance: self-priming height than the general self-priming pump 1 meter high, and self-priming time is shorter.
Technical Parameters
Flow: 5-800m3 / h;
Head: 12-60m;
Motor power: 2.2-132KW;
Speed: 1450-2900r / min;
Caliber: φ25-φ300;
Medium temperature: ≤ 100 ℃;
Self-priming height: 4.5-6.0m.
德国汉克（HANK）成立于1852年创建于门兴格拉德巴赫（Monchengladbach）是位于德国北莱茵-威斯特州杜塞尔多夫市以西的一座城市。于19世纪50年代初德国经济快速发展，由于德国能源短缺，政府在节能方面加大力度，因此HANK(Trouble Less pump的水泵)公司成立。汉克水泵是以生产高品质、*的水泵、测量及控制系统而的跨国性生产企业，在几十个国家拥有子公司及分支机构，公司产品涉及用途：石油、化工、电力、冶金、制药、食品、水处理、市政给排水、天然气、造纸、电子工业、楼宇、机械设备配套等领域。
GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..
德国汉克（HANK）水泵的价值理念概括为：责任－远见－创新。我们因自身的责任感、远见及专注于创造的解决方案和理念，而成为的水泵制造商。
The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.
本站客户服务
仪表网官微
仪表APP
仪表手机版
仪表小程序
