模拟最多108ch,检验数据传输时间为零
● 适用于ECU等高性能电路板的多点检测
● 模拟108ch~模拟96ch+逻辑48ch输入
● 媒介保存所需时间最短是原来的1/100
● 20MS/s所有通道同时采样
● 模拟所有通道绝缘输入,实现安全测量
● 支持4K监视器,无需重叠即可显示多通道波形
● 1单元可4ch输入(4ch模拟单元U8975、4chDVM单元U8991)
● 可以产生恒压、恒流、模拟电阻(VIR发生单元U8794)
基本参数(精度保证时间1年,调整后精度保证时间1年)
输入单元数 | 27个插槽 |
---|---|
通道数 | 模拟108ch (使用U8975时), 或模拟96ch + 逻辑48ch (使用U8975+8973时) 模拟54ch (使用8966时), 或模拟48ch+逻辑48ch (使用8966+8973时) ※8973逻辑单元的插槽限制为25~27限定, 最多3个单元 ※模拟单元的通道间和主机之间都绝缘,逻辑单元的通道之间都和主机共地 |
测量量程 | 100mV〜400V, 12档量程, 分辨率: 量程的1/2000 (使用8966时) 4V〜200V, 6档量程, 分辨率: 量程的1/32000 (使用U8975时) 100mV〜1000V, 5档量程, 分辨率: 量程的1/1000000 (使用MR8990时) 1V, 10V, 100V, 3档量程, 分辨率: 量程的1/1000000 (使用U8991时) |
输入电压 | DC 400V (使用8966时, 外加在输入端口间也不会损坏的上限电压) |
对地间额定电压 | AC, DC 300V (输入和主机之间绝缘,外加在输入通道〜外壳之间、各输入通道之间也不会损坏的上限电压) |
频率特性 | 使用8966时: DC〜5MHz (-3dB) |
采样速度 | 20MS/s 所有通道同时, 外部采样率10MS/s |
测量功能 | 存储记录 |
内存容量 | 1GW 16MW/ch (使用8966时), 8MW/ch (使用U8975或MR8990时), 4MW/ch (使用U8991时) |
内置存储设备 | SSD 480GB |
外部存储设备 | USB存储×8 |
监视器输出 | VGA, HDMI, DisplayPort 推荐分辨率 1920×1080 dot以上 |
外部接口 | [LAN] 1000BASE-T、100BASE-TX, 10BASE-TX (2port) [USB] USB3.0 ×4, USB2.0 ×4 |
电源 | AC100〜240 V, 50/60 Hz (400 VA max.) |
体积及重量 | 426W × 177H × 505D mm, 14.0 kg (主机) |
附件 | 电源线×1, 快速测量指南×1, 使用上的注意事项×1, 应用软件光盘(CD-R) ×1, 使用说明书 详细篇(CD-R) ×1, 空白面板(空白插槽), 机架安装支架 |
Basic parameters (precision guarantee time is 1 year, after adjustment, precision guarantee time is 1 year)
The maximum number of input units is 27 slots
Channel number simulation maximum 108ch (when using U8975), or simulation 96ch + logic 48ch (when using U8975+8973)
Analog maximum 54ch (on 8966), or analog 48ch+ logic 48ch (on 8966+8973)
※ the slot of 8973 logic unit is limited to 25 ~ 27, with a maximum of 3 units
The channel of the analog unit is insulated from the main machine, and the channel of the logic unit is in common with the main machine
Measuring range: 100mV ~ 400V, 12-range, resolution: 1/2000 of the range (8966 hours)
4V ~ 200V, 6 range, resolution: 1/32000 of range (when using U8975)
100mV ~ 1000V, 5-range, resolution: 1/1000000 of range (using MR8990)
1V, 10V, 100V, 3-range, resolution: 1/1000000 of the range (when using U8991)
Maximum input voltage DC 400V (with 8966, plus upper limit voltage without damage between input ports)
Maximum rated voltage AC, DC 300V between ground and ground (insulation between input and host, plus upper limit voltage between input channel ~ housing and each input channel without damage)
Frequency characteristic: DC ~ 5MHz (-3db) when 8966 is used
The maximum sampling speed is 20MS/s for all channels at the same time, the external sampling rate is 10MS/s
The measurement function stores records
The memory capacity is 1GW
16MW/ch (at 8966 hours),8MW/ch (at U8975 or MR8990 hours), 4MW/ch (at U8991 hours)
Built-in storage device SSD 480GB
External storage device USB storage x 8
Monitor output VGA, HDMI, DisplayPort
Recommend resolution 1920 x 1080 dot above
External interface [LAN] 1000base-t, 100base-tx, 10base-tx (2port)
[USB] USB3.0 4, USB2.0 4
Power supply AC100 ~ 240 V, 50/60 Hz (400 VA Max.)
Volume and weight 426W 177H 505D mm, 14.0 kg (host only)
Attached power cord 1, quick measurement guide 1, precautions for use 1, application software CD (cd-r) 1, detailed instructions (cd-r) 1, blank panel (only for blank slots), rack mounting bracket