2231A-30-3型3通道直流电源总输出功率为195W，可以为多种电路和器件的 台式测试提供所需的功率。其中，两个通道均可以提供30V@3A，第3个通道可以 提供5V@3A。2231A-30-3型电源在不降低性能或便利性的同时，为您提供所需的 多用性和易用性，因此，它将成为您工作台上的直流电源。
主要特点:
通过1台仪器获得3个独立、隔离、 可调的输出
输出总功率195W，包括2个 30V@3A输出和1个5V@3A输出
0.06%电压测量基本准确度， 0.2%电流测量基本准确度
直流电源输出噪声低于5mVp-p
连续显示3个通道的电压和电流 测量结果
将2个30V通道进行串联或并联， 可以使输出电压或电流翻倍
可在30个设置内存中的任意位置， 存储常用的测试配置
利用每个通道的输出定时器， 可以在预先设置的测试时间 之后关闭任何输出
利用可选配的USB适配器，可以 通过计算机控制电源
应用
工科和理科学生实验室
服务工作
电子设计
高质量直流电源
2231A-30-3型电源基于线性化设计，每个输出的噪声低于5mVp-p。其电压和 电流基本测量准确度分别是0.06%和0.2%。负载电压和负载电流回读结果提供同样 级别的精度，因此您可以确信为待测器件(DUT)提供了高精度、低噪声电压和电流。
3个独立的输出
2231A-30-3型电源的每个输出都是可编程的，可以彼此独立地开启和关 闭；它在1台仪器内提供了3个电源。您可以通过同一台仪器为印制电路板上的模拟 电路和数字电路上电，也可以为整个器件上电。
所有输出都彼此隔离，且接地隔离
每个输出都可以为不同接地基准的电路供电。每个输出的低连接都不与其他输 出相连。这意味着，一个电源可以测试3个不同接地基准上的3个独立电路，或者为 变压器电路或光隔离电路供电。此外，所有输出都参考接地，因此2231A-30-3型 电源可以为浮动电路和接地电路供电。
The total output of the 2231a-30-3 type 3-channel dc power supply is 195W, providing the power required for desktop testing of a variety of circuits and devices. Two channels can provide 30v@3a, and the third channel can provide 5v@3a. The 2231a-30-3 power supply provides you with the versatility and ease of use you need without compromising performance or convenience, so it will be the only dc power supply for your workstation.
Main features:
Three independent, isolated and adjustable outputs are obtained through one instrument
The total output power is 195W, including 2 30v@3a outputs and 1 5v@3a outputs
Basic accuracy of voltage measurement is 0.06%, and basic accuracy of current measurement is 0.2%
The output noise of dc power supply is lower than 5mvp-p
Continuous display of 3 channel voltage and current measurements
The output voltage or current can be doubled by connecting two 30V channels in series or in parallel
Common test configurations can be stored anywhere in 30 Settings memory
Using the output timer for each channel, you can turn off any output after a preset test time
With the optional USB adapter, you can control the power supply through the computer
application
Engineering and science student LABS
Service work
Electronic design
High quality dc power supply
The model 2231a-30-3 power supply is based on a linearized design, with each output noise lower than the 5mvp-p. The basic measurement accuracy of voltage and current is 0.06% and 0.2%, respectively. The load voltage and load current read back results provide the same level of accuracy, so you can be sure that the device under test (DUT) provides high precision, low noise voltage and current.
Three completely independent outputs
Each output of the 2231a-30-3 power supply is fully programmable and can be turned on and off independently of each other. It provides three power sources in one instrument. You can use the same instrument to power analog and digital circuits on a printed circuit board, or to power the entire device.
All outputs are isolated from each other and are grounded
Each output can supply power to a circuit with a different ground reference. Each output low connection is not connected to the other outputs. This means that a single power supply can be used to test three separate circuits on three different ground bases, or to supply transformer circuits or optical isolation circuits. In addition, all outputs are reference grounded, so model 2231a-30-3 power supplies can be used for both floating and grounded circuits.
