Amonics高功率光纤放大器EDFA系列提供0.5W ~ 20W饱和输出功率。是带钥匙开关的台式机,可在采用标准台式或机架外壳封装。
前面板包括液晶显示器、按键开关、电源调节控制旋钮、光纤输入输出适配器等。提供RS232计算机接口进行控制和监控。该EDFA非常适合科学研究、电信、光纤传感和有线电视应用领域的系统传输、研发和测试。
High Power EDFA Datasheet.pdf


Benchtop High Power EDFA Specifications
| AEDFA-27-B | AEDFA-30-B | AEDFA-33-B |
---|
Saturation Output Power (at 0dBm input signal) | Min. +27dBm | Min. +30dBm | Min. +33dBm |
Input Signal Level | -6 to +3dBm | -6 to +3dBm | -6 to +3dBm |
Noise Figure () (at 0dBm input signal) | Typ. 5.5dB | Typ. 6.0dB | Typ. 6.0dB |
Operating Wavelength | 1535nm to 1565nm | 1540nm to 1565nm | 1540nm to 1565nm |
Input Isolation | Min. 30dB | Min. 30dB | Min. 30dB |
Output Isolation | Min. 30dB | Min. 30dB | Min. 30dB |
Polarization Dependent Gain | Typ. 0.3dB, Max. 0.5dB | Typ. 0.3dB, Max. 0.5dB | Typ. 0.3dB, Max. 0.5dB |
Control Mode | ACC, APC, AGC (optional) | ACC, APC, AGC (optional) | ACC, APC, AGC (optional) |
L-Band or other output power models are available upon request
Rackmount High Power EDFA Specifications
| AEDFA-37-R | AEDFA-40-R | AEDFA-43-R |
---|
Saturation Output Power | Min. +37dBm (at +3dBm input signal) | Min. +40dBm (at +3dBm input signal) | Min. +43dBm (at +10dBm input signal) |
Input Signal Level | -3 to +10dBm | -3 to +10dBm | 0 to +13dBm |
Noise Figure | Typ. 6.0dB (at +3dBm input signal) | Typ. 6.5dB (at +3dBm input signal) | Typ. 8.5dB (at +10dBm input signal) |
Operating Wavelength | 1545nm to 1565nm | 1550nm to 1565nm | 1550nm to 1565nm |
Input Isolation | Min. 30dB | Min. 30dB | Min. 30dB |
Output Isolation | Min. 30dB | Min. 30dB | Min. 30dB |
Polarization Dependent Gain | Typ. 0.3dB, Max. 0.5dB | Typ. 0.3dB, Max. 0.5dB | Typ. 0.3dB, Max. 0.5dB |
Control Mode | ACC, APC (optional) | ACC, APC (optional) | ACC, APC (optional) |
L-Band or other output power models are available upon request
| unit | value |
---|
Operation Temperature | °C | 0 to 40 |
Storage Temperature | °C | -10 to 70 |
Power Supply | VAC | 90 – 240, 47 – 63Hz |
Benchtop Dimensions | mm | 260(W) x 330(D) x 120(H) |
2U Rackmount Dimensions | mm | 485(W) x 515(D) x 90(H) or 485(W) x 360(D) x 90(H) for AEDFA-37-R |
3U Rackmount Dimensions | mm | 485(W) x 615(D) x 150(H) for AEDFA-40-R, AEDFA-43-R |
Mechanical Safety Control |
| Key-lock switch, BNC interlock key |
Optical Power Monitoring |
| Output power, Input power (optional) |
Remote Control Port |
| DB-9 female (RS232), LabView control software included RJ-45 (TCP/IP Ethernet) (optional) |
Protection |
| Pump laser (TEC) overheat |
Optical Connector |
| FC/APC, FC/UPC, SC/APC, SC/UPC, Bare fiber |
Optical Fiber |
| SMF-28 |
Product Code |
---|
AEDFA-xx-y-zz |
xx : Saturation output power in dBm |
y : B for Benchtop, R for 19” Rackmount |
zz : FA for FC/APC, FC for FC/UPC, SA for SC/APC, SC for SC/UPC, NC for bare fiber |
SONET/SDH Systems |
Optical Communications |
Fiber Optic Sensing |
CATV |
Laboratory |
Turnkey device |
RS232/Ethernet interface |
High output power, up to 20W |
High gain |
Low noise figure |
Highly reliable and durable |