8718系列电位式位移传感器
用于大测量范围内的精确和线性测量，高分辨率，紧凑，无杆
-
Features
- 量程范围从 0 … 100 mm 到 0 ... 2000 mm
- 非线性度可达 0.05 % F.S.
- 紧凑型无杆设计
- 位移速度可达10m/s
- 耐用性，寿命可达1亿次
-
Product data
型号 8718 量程范围 0...100mm 0...150mm 0...200mm 0...300mm 0...400mm 0...500mm 0...600mm 0...750mm 0...1000mm 0...1250mm 0...1500mm 0...1750mm 0...2000mm 信号输出类型 取决于传感器激励供电电压 保护等级 IP40 工作温度 -30°C...+100°C 激励供电电压 50 VDC 复位弹簧 无 具体特征 - 量程范围从 0 … 100 mm 到 0 ... 2000 mm
- 非线性度可达 0.05 % F.S.
- 紧凑型无杆设计
- 位移速度可达10m/s
- 耐用性，寿命可达1亿次
-
Description
The high resolution allows linear measurements to be accurately sized even in large measurement ranges. Conversion of rotatory and translational motion by spindles, wires or others is not necessary for direct displacement measurement.
Areas of application are:- Hydraulic and pneumatic cylinders
- Detection of positions on coordinate
- inspection machines
- Displacement of plungers, knee levers or extruders
- Coil and de coil lengths
- Strokes on chassis
- Metering strokes
Displacement sensors model 8718, using a resistance track made of conductive plastic material, are suitable for direct, accurate and absolute measurements of displacements and lengths.
Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.
The vibration-cushioned slider allows a clear signal output even by slight shocks or high operating speeds up to 10 m/s. Due to its simple design the sensor is largely protected against electrical interference fields (Al-housing), it keeps the measured value after a power failure and does not generate any electrical interference.
A magnetically hold steel bａnd covers the whole measurement device gap free. Any lateral forces are avoided by a ball joint coupling mounted to the sensor.
-
Downloads
Data sheet
8718参数资料 EN -
LINKS & CAD DATA
