GRINNELL VALVES 格林奈尔蝶阀(现货）双相钢止回阀-仪表网

公司介绍主营产品

深圳市泰科德技有限公司是经国家工商部门批准注册的经营阀门、超声波流量计、气动执行机构、监测仪表、水质分析仪表的有限责任公司，深圳市泰科德技有限公司具备阀门、流量计、气动执行机构、监测仪表、水质分析仪表的招商代理资格。深圳市泰科德技有限公司总部设在深圳平湖镇。深圳市泰科德技有限公司优质的产品质量,广阔的市场前景,丰厚的代理待遇,强大的代理优势,让您创业投资不再难。深圳市泰科德技有限公司热诚欢迎各位有志之士前来实地参观和考察。

点击展示更多内容

产品简介在线询价

GRINNELL VALVES 格林奈尔蝶阀，格林奈尔阀门，1000系列，8000系列，WC-8100，GHP系列GRINNELL VALVES 格林奈尔蝶阀(现货）

GRINNELL VALVES 格林奈尔蝶阀(现货）双相钢止回阀产品详情

GRINNELL VALVES 格林奈尔蝶阀 GRINNELL VALVES 格林奈尔蝶阀(现货）
主要包括1000，8000，GHP三大系列

欢迎来到Grinnell阀门公司

Grinnell格林奈尔是工业、商业和建筑市场阀门的*制造商。

Grinnell格林奈尔阀门采用**的加工设备生产。每个阀门在出厂前都经过110%的打压测试，确保每一个阀门的安全可靠。
现货供应GIRNNELL VALVES 美国格林奈尔光杆蝶阀，气动蝶阀，现货口径有：DN80mm,DN100mm,DN150mm等规格。
型号为：
GRINNELL 080 WC-8100/6G/AN150
GRINNELL 100 WC-8100/6G/AN150
GRINNELL 150 WC-8100/6G/AN150

Series 1000 Resilient Seated Butterfly Valves

BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.

STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.

SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.

Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.

TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.

Series 1000 Drawings

PDF

Wafer Barestem
Wafer Lever Operated
Wafer Gear Operated

Lug Barestem
Lug Lever Operated
Lug Gear Operated

Series 8000 Resilient Seated Butterfly Valves

BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEMS
Heavy-duty, two-piece design allows for easy maintenance. Stems are secured by the use of retaining pins.

BEARINGS
Two bronze or Teflon^®* bearings are standard on 2"-12". Sizes above 12" have full-length bearings on upper and lower stems.

Stem/Disc Attachment
Rectangular drive ensures proper disc connection. No pins or bolts are exposed to flow.

Seat
Elastomer, reinforced with phenolic backing ring, enables valve to be used on pressure or vacuum service. Seat can be field replaced. Grinnell's special double seal design eliminates the need for flange gaskets. Three stem seal O-rings are molded into the the seat liner to back up the primary stem seal.

DISC
Streamlined for maximum flow and minimum seat wear. Ease of maintenance due to the elimination of bolts, pins, etc., as disc to stem connectors.

Dead-End Service
A unique patented lip, integral to the body prevents the liner from moving downstream, eliminating seat and flange leakage. This feature allows lug valve to be used in uni-directional, dead-end service applications at full rated pressure without the use of downstream flange.

* Teflon^® is a registered trademark of the E.I. DuPont de Neymour Company

Series 8000 Drawings

PDF

Dimensional Drawings with New Stem Dimensions
2" - 12" WAFER Bare Stem
2" - 12" LUG Bare Stem
14" - 24" WAFER Bare Stem
14" - 24" LUG Bare Stem

Dimensional Drawings with Old Stem Dimensions
2”-12” Wafer Barestem
14”-24” Wafer Barestem
2”-12” Wafer Lever Operated
2”-12” Wafer Gear Operated
14”-24” Wafer Gear Operated
2”-8” Wafer w/ 80 psi S/R Pneumatic Actuators
10”-12” Wafer w/ 80 psi S/R Pneumatic Actuators
2”-10” Wafer w/ Electric Actuators
12” Wafer w/ Electric Actuators
Wafer Sanitary Valves

2”-12” Lug Barestem
14”-24” Lug Barestem
2”-12” Lug Lever Operated
2”-12” Lug Gear Operated
14”-24” Lug Gear Operated
2”-8” Lug w/ 80 psi S/R Pneumatic Actuators
10”-12” Lug w/ 80 psi S/R Pneumatic Actuators
2”-10” Lug w/ Electric Actuators
12” Lug w/ Electric Actuators
Lug Sanitary Valves

Series GHP High Performance Butterfly Valves

		Body Material & Standard: Carbon Steel ASTM A216-WCB or 316 Stainless Steel ASTM A351-CF8M DISC Material & Standard: 316 Stainless Steel ASTM A 351-CF8M Stem & Taper Pins Material & Standard: 17-4PH ASTM A 564 Cond. H10751-CF8M Glａnd Bridge Material: 17-4SS PH Packing Material: PTFE or Graphite Bearings Material & Standard: 316 SS Nitride	Seat Retaining Ring Material & Standard: Carbon Steel ASTM A36 or Stainless Steel ASTM A240 Seat Material & Standard: RTFE Reinforced polytetrafluoroethylene [optional: PTFE]
		Two-Piece Stem Design Two-piece stem disc geometry maximizes flow capacity by increasing the available flow area through the valve. This increase in disc efficiency results in higher valve Cv.
		COMPETITOR one-piece stem	HI-SEAL two-piece stem
		Aspect Ratio = Open Area ÷ Disc Area

Series GHP High Performance Butterfly Valves

PDF

2”-12” Wafer Barestem
12”-12 Wafer Lever Operated
2”-12” Wafer Gear Operated

2”-12” Lug Barestem
2”-12” Lug Lever Operated
2”-12” Lug Gear Operated

热门产品

产品名称	参考价	地区	公司名称	更新时间
沃茨青铜旋启式止回阀	面议	上海市	上海霄鹏自动化科技有限公司	2025-02-28	在线询价
法兰对夹式止回阀	面议	无锡市	江苏华英阀业有限公司	2025-05-09	在线询价
智能止回阀优势	面议	扬州市	扬州贝尔阀门控制有限公司	2025-03-08	在线询价
DN250电动铸钢微阻缓闭止回阀	￥1264	上海市	上海湖泉阀门集团有限公司	2025-03-08	在线询价
原装意大利Dropsa分配器润滑泵截止止回阀	￥1000	天津市	天津克莱瑞科技有限公司	2025-04-11	在线询价
巴阀门TOMOE VALVE小型止回阀903L	￥19536	重庆市	重庆津泽机电科技有限公司	2024-01-25	在线询价

免责申明

所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，仪表网对此不承担任何责任。仪表网不涉及用户间因交易而产生的法律关系及法律纠纷，纠纷由您自行协商解决

友情提醒：本网站仅作为用户寻找交易对象，就货物和服务的交易进行协商，以及获取各类与贸易相关的服务信息的平台。为避免产生购买风险，建议您在购买相关产品前务必确认供应商资质及产品质量。过低的价格、夸张的描述、私人银行账户等都有可能是虚假信息，请采购商谨慎对待，谨防欺诈，对于任何付款行为请您慎重抉择！如您遇到欺诈等不诚信行为，请您立即与仪表网联系，如查证属实，仪表网会对该企业商铺做注销处理，但仪表网不对您因此造成的损失承担责任！

相关产品分类更多+