氟塑料绝缘耐高温控制电缆

氟塑料绝缘耐高温控制电缆Fluoroplastics Insulated Heat Resisting Control Cable

一、产品特点及用途

本产品适用于交流额定电压600/1000V及以下控制、监控回路以及电器仪表的连接线和自动控制系统的传输线。产品具有耐油、防水、耐磨、耐酸碱及各种化学试剂(除氯仿外)和各种腐蚀性气体、耐老化、不燃烧等优异性能:本产品主要适用于冶金、电力、化工、石油等工矿企业在高温、低温及各种恶劣环境中作电器、仪表的连接线和自动控制系统的传输线。氟塑料绝缘和护套耐高温控制电缆采用聚全氟乙丙烯或改性聚四氟乙烯材料，产品具有比普通控制电缆更高的耐热等级

Product Characteristic and Application

It is used as connection cable for electric appliances& instruments and transmission cable for automatic control system in controlling and supervising loop of A.Crated voltage of 600/1000V or lower.It has good featureof oil resistance.abrasion resistance. acid & alkali resistance.various chemical reagent(except chloroform)ａnd corrosive gas resistance, aging resistance and badweather resistance etc. It is used as connection cable forelectric appliances & instruments and transmission cablefor automatic control system under bad environment ofextreme temperature mainly in the field of metallurgypower, chemical and petroleum enterprises. F46 or Teflon insulation material is adopted by control cable withfluoroplastics insulation & sheath and high temperatureresistance. It has better heat resistant degree comparedwith common control cable.

二、执行标准

采用企业标准和TICW/03-2009

Executive standard:

enterprise standard and TICW/03-2009

三、产品使用特性

1、交流额定电压:U。/U为450/750V、600/1000V:

2、电缆导体长期允许工作温度为:

氟塑料外护层为200℃/260℃:

聚氯乙烯外护层为105℃;

硅橡皮外护层为180℃。

3、电缆的敷设温度应不低于:

聚氯乙烯护套电缆0℃;

硅橡皮护套电缆-20℃:

氟塑料护套电缆-20℃。

4、电缆推荐允许弯曲半径:

无铠装层的电缆,应不小于电缆外径的6倍;

有铠装层的电缆或带铜带屏蔽结构的电缆,应不小于电缆外径的12倍:

有屏蔽层结构的软电缆,应不小于电缆外径的6倍氟塑料绝缘护套材料的电缆应不小于电缆外径的8倍

Performance for Usage

1.A.C.rated voltage U0/U: 450/750V、600/1000V;

2.Long-term working temperature of cable conduc- tor:

Temperature of fuoroplastic outer protecting layer is 200℃/260℃;

Temperature of PVC outer protecting layer is 105℃.

Temperature of silicon rubber outer protecting layer is 180℃;

3. Temperature for installing cable is no lower than:

0℃ for cable with PVC sheath;

-20℃ for cable with silicon rubber sheath;

-20℃ for cable with fluoroplastic sheath;

4. Bending radius allowed by cable:

It is no less than 6 times that of cable OD for cable withinarmored layer;

It is no less than 12 times that of cable OD for cable witharmored layer or copper tape shielding;

It is no less than 6 times that of cable OD for soft cablewith shielding structure;

lt is no less than 8 times that of cable OD for cable withfluoroplastic insulation and sheath;

四、电缆型号及名称Type and Description

1、基本型号及名称 Basic Tvpe and Description

2、型号结构组合形式 Type-naming Indication

五、代号名称及含义 Codes Meaning

注:可根据用户需要生产、设计特殊规格和型号电缆。

Note: we also produce cable with special specification and type according to the requirement of customer.

六、电缆的结构图如下所示 The figure of cable structure

七、电缆的规格如下表所示 Specification of Cable in Following Table

八、主要技术指标 Main TechnicalIndices