磁力冷却液分离器日本KANETEC强力牌
磁力冷却液分离器 型号：
MS- 2FC、MS- 4FC、MS- 6FC、MS- 8FC、MS-12FC、MS-18FC、MS-24FC、MS- 2FCH、MS- 4FCH、MS- 6FCH、MS- 8FCH、MS-12FCH、MS-18FCH、MS-24FCH、MS-2FCHP、MS-4FCHP、MS-6FCHP、MS-8FCHP、MS-12
MS系列磁力冷却液分离器 日本KANETEC强力牌
磁力冷却液分离器 型号：
MS- 2FC、MS- 4FC、MS- 6FC、MS- 8FC、MS-12FC、MS-18FC、MS-24FC、MS- 2FCH、MS- 4FCH、MS- 6FCH、MS- 8FCH、MS-12FCH、MS-18FCH、MS-24FCH、MS-2FCHP、MS-4FCHP、MS-6FCHP、MS-8FCHP、MS-12FCHP、MS-18FCHP、MS-24FCHP
磁力冷却液分离器 别名：
磁力冷却液分离器、铁屑分离器
磁力冷却液分离器 用途：
把本装置组装在磨床的磨削液净化循环系统内，以除去铁粉，这是净化作用中的一个主要环节。
同时使用通过浮游和沉淀进行比重分离的罐，就能分离铁粉以外的砂轮粉等，可使清净再生的磨削液再次供应给磨床。
磁力冷却液分离器 特点：
●磁筒的磁铁是固定的，在结构上是外周的筒壳旋转，刮板部 没有磁铁，因此能把油泥顺利排出。（也提高了刮板寿命）
●改变了磁筒的旋转驱动结构，大幅度提高了耐用性。
●重新设计了压辊的张力结构，从而获得了较高的挤压性能。
●压辊部和流入部添加了盖，从而提高了安全性和防止磨削 液的四溅。
●流出口可选择左右和下面，可灵活地应对循环系统设计的 变更。
●高磁力型（MS-FCH：筒表面最大磁通密度0.3T（ 3000G ））以及超高磁力型（ MS-FCHP ： 0.5T（5000G））最适宜 用来回收弱磁性油泥和微细油泥。
●可制作电动机安装在右边（MS-F-R）的型号的。
MAGCLEAN MAGNETIC COOLANT SEPARATOR KANETEC
MS-4FC
(SERTEC motor）
[Application]
This is unti is incorporated in the coolant purification and circulation system for grinders to remove iron particles, a major part of purification.
When it is used together with a tank in which particles other than iron powder such as abrasive grains are separated by floating and precipitation, re-precioitation, repurified and regenerated coolant can be supplied to grinders agein.
[Features]
The construction of a stationary magnet and a rotary outer drum shell has no magnet in the area of the rake plate and allows smooth discharge of sludge.(The life of the rake plate is also prolondged.)
The magnetic drum rotation drive construction has been modified to improve surability significantly.
The squeezing roller tensioning mechanism has been designed anew to improve the squeezing performance.
The squeezing roller and inlet are convered to enhance asfety as well as to pervent grinding coolant from splashing/scattering.
The outlet can be located on the right,left or bottom thanks to a good criculation system layout.
The high magnetic force MAGCLEAN (MS-FH・MS-FHP:rare earth magnet) works effociently for collecting weak magnetic sludge and minute slude.
A Type having a motor on the right side(MS-F-R) is also available.
MS-FC/FCH/FCHP
MS-FC-R
| 【Specifications】 | (mm) | ||||||||||
| Model | Processing Capacity | Power Source | Motor | Dimension | Mass | ||||||
| Standerd Type | High magnetic force type | Super High magnetic force type | Moter on the Right Side | B | L | H | h | ||||
| MS-2FC | MS-2FCH | MS-2FCHP | MS-2FC-R | 20L/min | 3-phse Ac200/220V 50/60Hz | 25W | 141 | 375 | 271 | 135 | 15kg |
| MS-4FC | MS-4FCH | MS-4FCHP | MS-4FC-R | 40L/min | 191 | 380 | 18kg | ||||
| MS-6FC | MS-6FCH | MS-6FCHP | MS-6FC-R | 60L/min | 241 | 21kg | |||||
| MS-8FC | MS-8FCH | MS-8FCHP | MS-8FC-R | 80L/min | 40W | 341 | 510 | 286 | 142 | 32kg | |
| MS-12FC | MS-12FCH | MS-12FCHP | MS-12FC-R | 120L/min | 441 | 515 | 151 | 38kg | |||
| MS-18FC | MS-18FCH | MS-18FCHP | MS-18FC-R | 180L/min | 491 | 655 | 321 | 165 | 45kg | ||
| MS-24FC | MS-24FCH | MS-24FCHP | MS-24FC-R | 240L/min | 541 | 50kg | |||||
| *All models come with a sludge bock | |||||||||||
Sludge box:MS-2F*/4F*/6F*
| Model | Dimensions (mm) | ||
| L | W | H | |
| MS-2F* | 193 | 148 | 82 |
| MS-4F* | 267 | 165 | 95 |
| MS-6F* | |||
Sludge box:MS-8F*/12F*/18F*/24F*
| Model | Dimensions (mm) | ||
| L | W | H | |
| MS-8F* | 308 | 170 | 210 |
| MS-12F* | 410 | 230 | |
| MS-18F* | 460 | ||
| MS-24F* | 510 | ||
Optional components to support MS-F installation
Inflow BoxHeight-adjustable parts| Model | Dimensions (mm) | ||||
| Standard Type | High magnetic force type | Super High magnetic force type | h | L | H |
| MS-2FC | MS-2FCH | MS-2FCHP | 105 | 110 | 105 |
| MS-4FC | MS-4FCH | MS-4FCHP | 130 | ||
| MS-6FC | MS-6FCH | MS-6FCHP | 150 | ||
| MS-8FC | MS-8FCH | MS-8FCHP | 155 | 170 | 115 |
| MS-12FC | MS-12FCH | MS-12FCHP | 190 | ||
