冶金管端探伤机
Metallurgical pipe end flaw detector
该设备为在线检测设备，适用于钢铁行业的圆钢、钢管管端等探伤，设备的特点是能满足钢铁行业的在线探伤，设备必须与相关的辅机配合，根据工件表面的情况，需要对工件进行清洗、吹干等，成套设备有储料台架、步进机构、输送辊道、清洗系统、喷淋系统、磁化系统、观察机构、退磁机构、吹干装置、输出辊道、下料机构、修磨系统等组成，设备采用的电子技术，采用模块化国际电路，周向采用大型磁轭，纵向采用线圈，设备可分别周向磁化、纵向磁化和复合磁化，能自动完成工件步进、辊道输送、清洗、吹干、喷淋、磁化、荧光观察、退磁、下料、修磨等，工件两头无盲区，整机外型美观、大方，可适用钢厂所有钢管管端探伤等。
The equipment is an on-line inspection equipment, which is suitable for flaw detection of round steel and steel pipe ends in the steel industry. The biggest characteristic of the equipment is that it can meet the on-line flaw detection in the steel industry. The equipment must be matched with relevant auxiliary machines. According to the surface conditions of the workpiece, the workpiece needs to be cleaned and dried. The complete set of equipment consists of a material storage rack, a stepping mechanism, a conveying roller table, a cleaning system, a spraying system, a magnetization system, an observation mechanism, a demagnetization mechanism, a drying device, an output roller table, a blanking mechanism, a grinding system and the like. The equipment adopts advanced electronic technologies at home and abroad, adopts modular international circuits, adopts large yokes in the circumferential direction and coils in the longitudinal direction, and can be magnetized in the circumferential direction, the longitudinal direction and the composite magnetization respectively. It can automatically complete workpiece stepping, roller conveying, cleaning, blow drying, spraying, magnetization, fluorescence observation, demagnetization, blanking, grinding, etc. There is no blind area at both ends of the workpiece. The whole machine is beautiful and elegant in appearance and can be used for flaw detection of all steel pipe ends in steel mills.
