CQL Gas-liquid-solid mixd transmission Magnetic Drivien Pump
CQL型泵通过内外磁转子进行耦合传动,外磁转子与电机直联,隔离套将内磁转子密封在泵腔内,运用磁力密封与氮气阻隔组合,从根本上解决了含固体颗粒、含气体介质的输送难题。
适于输送低固相、分散的固体颗粒悬浮液,是一种典型的可输送含固体颗粒物的磁力泵。
Model CQL pump is driven by coupled internal and external magnetic rotors. The external magnetic rotor is directly connected to the motor. An isolation sleeve seals the internal magnetic rotor inside the pump cavity. Magnetic sealing is combined with nitrogen blocking, solving the difficult problem of conveying media containing solid particles and gas.
These pumps are applicable to conveying low solid phase, distributed solid particles suspension liquid, being a typical magnetic drive pumps capable of conveying media containing solid particles.
结构说明 Description of structure
2、通过磁性联轴器驱动,磁力密封与氮气阻隔组合配置,全密封、无泄漏。
3、轴向力利用流体力学原理自动平衡。
4、优化的叶轮水力设计,适宜含杂质、含固体颗粒的物料输送。
5、叶轮水力设计配套动力密封运行,防止了汽蚀破坏,在边界条件下都是安全的。
6、泵的结构可以实现长时间干运转,磁传动及轴承部件寿命长。
7、泵入口处于系统的位,排除泵内积液比较方便和迅速。
8、泵及电机装配好之后整体被固定在底架上,安装方便。
2. Driven by magnetic coupling; magnetic sealing combined with nitrogen blocking; fully sealed;
3. Automatic balance of axial force using fluid mechanics principle
4. Optimized impeller hydraulic design suitable for conveying materials containing impurities
and solid particles
5. Impeller hydraulic design plus operation of matching dynamic seal prevents cavitation effect
and allows safety under all boundary conditions.
6. The pump structure fully realizes long dry operation and long service life of magnetic drive
and bearings.
7. Pump inlet is at lowest part of the system, allowing easy and quick discharge of accumulated
liquid in the pump.
8. After assembling of pump and motor, they are fixed on the underframe as an integral machine,
hence the installation is easy.
流量Flow: 5.5~1100m3/h
扬程Lift: 4.5~130m
介质温度Media temperature: -45℃~+250℃
法兰压力等级Flange pressure rating: 2.5MPa
型号意义 Type denotation

