West P6100 1/16 DIN 通用型过程控制器
无跳线配置
- 自整定
- 自动检测硬件
- 加热/冷却操作
- 过程和回路报警
- 设定点斜率
- Modbus 和 ASCII 通讯
远程/双设定
West P6100 1/16 Din Process Controller
With its improved interface, technical functionality and field flexibility, the West 6100 gives you the best in comprehensive control for most temperature and process control loops.
• Jumper less Configuration
• Auto or Manual Tuning
• Auto Detected Hardware
• Heat/Cool Operation
• Process & Loop Alarms
• Ramping Set point
• Modbus & ASCII Comms
• Remote/Dual Set point Options
West P6100 1/16 DIN 通用型过程控制器
籍其友好的用户界面、强大的技术功能以及灵活的现场配置，West P6100 在温
控与过程控制领域表现出的性能。
- 无跳线配置
- 自整定
- 自动检测硬件
- 加热/冷却操作
- 过程和回路报警
- 设定点斜率
- Modbus 和 ASCII 通讯
- 远程/双设定
West P6700 1/16 DIN FM Approved Limit Controller
• High or low limit control.
• Storage of peak temperature plus duration of alarm condition.
• Plug and Play Technology allows field upgrades.
• Dedicated configuration port allows configuration directly from PC for fast and repeatable configurations.
• Password protection limiting operator access and providing process security.
• Display process value, set point or both.
The 6700 provides a latched relay output which is activated
when process parameters either exceed or fall
below the desire value, providing a fail safe cutoff which
has to be manual reset once the process returns to a
safe condition. This limit controller is FM approved.
West P6700 1/16 DIN 限位控制器
West P6700 是一种可编程的安全切断装置，报警和指示灯输出任选。当超过安全值
时，自锁继电器会切断电源，过程必须在复位后才能继续。它拥有改进的P 系列硬件以及友好的用户界面，使用起来更容易。
- 高或低报警脱扣
- 无跳线组态
- 5A 自锁限位继电器
- 自动检测硬件
- 远程复位选件
- Modbus 和 ASCII 通讯
- 超限和继电器指示灯
- 2 个报警器或指示灯
West P4170 1/4 DIN Valve Motor Drive Controller
• Open loop control eliminates the need for slidewire feedback.
• Plug and Play Technology allows for field upgrades.
• Dedicated configuration port allows configuration directly from PC for fast and repeatable configurations.
• Two Auto-tune algorithms: Pre-tune plus Self-tune.
• Third output for alarm or retransmission output.
The 4170 is a 1/4 DIN controller with continuous online
open loop control of valve motor drives or electric
actuators. This feature allows for accurate control without
the need for slidewire feedback. This lowers the
cost of the motor and wiring, without sacrificing control.
West P4170 1/4 DIN 阀位控制器
West P4170 是一种专为控制阀位马达设计的过程控制器，配有*的阀位控制算法，无需阀位反馈信号。
- 电动阀门控制
- 设定点斜率
- 2 个过程报警
- 自整定
- 回路报警
- 双设定点
- RS485 通讯
- 计算机组态
West P8010 1/8 DIN Indicator
• Large four digit display available in green or red.
• Alarms can be latching or non latching.
• Two or three alarms available.
• Plug and Play Technology allows field upgrades.
• Dedicated configuration port allows configuration directly from PC for fast and repeatable configurations.
West P8010 1/8 DIN 数字显示器
West P8010 是一种基于微处理器的 1/8 DIN 数字显示器。可以是红色或绿色显
示。标配有一个自锁继电器，通过插件可以加入两个报警继电器、变送输出或变送器电源模块。
- 4 位 LED 显示
- 工程单位显示
- zui多3 个报警输出
- 计算机组态
- 变送器电源（可选）
- 过程值变送输出（可选）
- zui小/zui大值保持
- RS485 通讯选件
West 8170 1/8 DIN Valve Motor Drive Controller
• Open loop control eliminates the need for slidewire feedback.
• Plug and Play Technology allows for field upgrades.
• Dedicated configuration port allows configuration directly from PC for fast and repeatable configurations.
• Two Auto-tune algorithms: Pre-tune plus Self-tune.
• Third output for alarm or retransmission output.
West P8170 1/8 DIN 阀位控制器
West P8170 是一种专为控制阀位马达设计的过程控制器，配有*的阀位控制算
法，无需阀位反馈信号。
- 电动阀门控制
- 设定点斜率
- 2 个过程报警
- 自整定
- 回路报警
- 双设定点
- RS485 通讯
- 计算机组态
West MLC 9000+ CANopen Bus Communications Module
The CANopen Bus Communications Module （BCM） is part of the MLC 9000+ DIN-Rail mounting PID control system. The BCM handles communication between up to 8 single or multi loop controller modules and the CANopen network. Systems larger than 32 loops can be built using multiple BCMs, within the limitations of your CANopen system.
- CANopen port
- Software Configurable
- Supports up-to 1024kbps
- Configuration port
- DIN Rail Mounting
- Configurable Data Assemblies
West MLC 9000+ CANopen 总线模块
CANopen 总线模块是 MLC 9000+ 多回路 PID 控制系统的一部分。该总线模块是 MLC 9000+ 系统中的管理员，用于管理与zui多 8 个单回路或多回路模块以及 CANopen 网络的通讯。当构建大于32 个回路的系统时，可以在CANopen 系统支持的网络范围内使用多个总线模块。
- CANopen 端口
- 可由软件组态
- 支持zui高 1024kbps
- 组态端口
- DIN 导轨安装
- 可组态数据链接
