上海乔跃电子有限公司
温度保险丝检测恒温槽/熔断器检测恒温槽
热熔器测试槽/热熔器检测恒温槽
测试方法：
将试样两引脚分别连接在测试设备的夹具上 通上10毫安左右的检测电流（zui大不超过100毫安），将硅油池温度先稳定在TF-10度（硅油池带搅拌，保证温度均匀，升温速率可调）然后将实验放到硅油池内，采用受控温度即0.5℃±0.2℃/MIN这样的升温速率，每个试样都有温度传感器检测温度，有槽内有单独测试通道，一根熔断器一个测试通道，设计共10个通道，每个通道单独监控一个熔断器。熔断器在某个温度点熔断后，设备及时提醒并锁定熔断温度。
想了解更多温度保险丝检测恒温槽/ 熔断器检测恒温槽资料请咨询上海乔跃实业有限公司，：
Test method:
Sample two pins are connected to the device under test fixture on the flux on 10 ma test current （not more than 100 ma）, silicone oil pool temperature stability in TF - first 10 degrees （silicone oil pool with stirring, ensure uniform temperature, heating rate is adjustable） then experiment on the silicone oil pool, the controlled temperature is 0.5 ℃ heating rate plus or minus 0.2 ℃ / MIN, every sample has a temperature sensor to detect temperature, slotted in separate test channel, a fuse a test channel, design a total of 10 channels, each channel individually monitor a fuse. After fuse fuse at a certain temperature, equipment timely warning and lock fusing temperature.
Want to learn more temperature fuse detecting thermostatic bath/fuse in constant temperature trough information consult Qiao Yue industrial co., LTD.,
：--吕（，优惠更多，请致电！）
幽默一分钟：女友做财务工作，年底特别忙。我给她发了条祝福短信：“亲爱的，祝你财源滚滚，数钱数到手抽筋。”过了好一会儿，女友回短信说：“以后闭上你的乌鸦嘴——点钞机坏了，我正在数钱。”
